Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Wayne Dateigröße: 834.72 kb Dateiname: 1aa2343a-2c3e-4c85-9b74-f04acc45a451.pdf Unterrichtssprache:

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Sewer Ejector Pump Description The submersible pump is designed for home applications. The unit is equipped with a 3-prong grounding type power cord. Motor is oil-filled and sealed for cooler running and designed to operate under water. This pump is not suitable for aquatic life, ponds or fountains. Unpacking Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death. Important Safety Instructions READ AND FOLLOW ALL INSTRUCTIONS Safety Guidelines This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols: Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, MAY cause damage to equipment. General Safety Information CALIFORNIA PROPOSITION 65 This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. GENERAL SAFETY INFORMATION Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in a flammable and/or explosive atmosphere. Personal injury and/or property damage could result. This pump is not designed to handle salt water, brine, laundry discharge or any other application which may contain caustic chemicals and/or foreign materials. Pump damage could occur if used in these applications and will void warranty. All wiring must be performed by a qualifi ed electrician. If the basement has water or moisture on the floor, do not walk on wet area until all power is turned off. If the shut-off box is in the basement, call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock. Specifications Power supply requirements SEP4. . . . . . . . . . . . . . . . . . . . . . . . 120V, 60 hz SEP5, SEP6, and SEP8. . . . . . . . . . 240V, 60 hz Motor . . . . . . . . . . . . . . . . . . . . . . . . Single phase, oil filled Construction Horsepower/Current Motor housing. . . . . . . . . . . Cast Iron SEP4. . . . . . . . . . . . . . . . . . . . . . . . 1/2 HP, 12A @ 115VAC Volute . . . . . . . . . . . . . . . . . . Cast Iron SEP5. . . . . . . . . . . . . . . . . . . . . . . . 3/4 HP, 7A @ 230VAC SEP6. . . . . . . . . . . . . . . . . . . . . . . . 1 HP, 8.5A @ 230VAC Impeller. . . . . . . . . . . . . . . . . Cast Iron SEP8. . . . . . . . . . . . . . . . . . . . . . . . 2 HP, 12A @ 230VAC Shaft . . . . . . . . . . . . . . . . . . . Low carbon steel Liquid temperature range . . . . . . . 40°F to 120°F Seals. . . . . . . . . . . . . . . . . . . . Buna N Circuit requirements . . . . . . . . . . . . 15 amps (min) Discharge . . . . . . . . . . . . . . . 3in. NPT Dimensions. . . . . . . . . . . . . . . . . . . . . . 11 1/2 in. high x 9 3/4 in. base 2 in. NPT (Adapter included) REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2009 Wayne Water Systems For parts, product & service information 332200-001 2/...

Herunterladen

Geben Sie zwei Ziffern: