Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS Item Description Electrical Requirements 120 Volt / 60 Hz / 1/2 HP / Single Phase Continuous Run Thermal Overload Protection 3 Prong, Grounded Power Plug Pump Type Trash Water / Centrifugal / Pit Type / Self-Priming / Air Cooled Maximum Lift: 36 Feet Minimum Water Pick-up Height 4-3/4” Discharge Outlet Size 2” O.D. Maximum Discharge Capability 71 Gallons Per Minute At Pump Outlet Maximum Size Particle Uptake 1-3/8” Pump Basin Required Size Minimum 18” Diameter Temperature Operating Range 32° To 104° Fahrenheit Overall Dimensions 9-1/2” Diameter x 17” High Weight 42.2 Pounds SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. UNPACKING When unpacking, check to make sure all the parts shown on the Parts Lists on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. GENERAL SAFETY RULES IMPORTANT SAFETY INSTRUCTIONS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS REV 08/05 SKU 92481 For technical questions, please call 1-800-444-3353. PAGE 2 WORK AREA 1. Keep your work area clean and well lit. Cluttered and dark work areas invite accidents. 2. Do not operate the Sump Pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrical equipment creates sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating the Sump Pump. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools must be plugged into a GFCI (Ground Fault Circuit Interrupter) outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 3. Do not abuse the Power Cord. Never use the Power Cord to pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 92481 For technical questions, please call 1-800-444-3353. PAGE 3 3. Avoid accidental starting. Be sure the circuit supplying electrical power is off before plugging in. Plugging in a Sump Pump with the electrical circuit on invites accidents. 4. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the Sump Pump in unexpected situations. 5. Always wear eye protection. Wear ANSI approved safety impact goggles and nonskid rubber boots. A hard hat must be used for appropriate conditions. TOOL USE AND CARE 1. Do not force the Sump Pump. Use the correct Pump for your application. The correct Pump will do the job better and safer at the rate for which it is designed. 2. Do not use the Sump Pump if the electrical circuit system does not turn it on or off. Any electrical circuit system that cannot be controlled is dangerous and must be repaired or replaced. 3. Turn off the electric power to the outlet supplying power to the Sump Pump and disconnect the Pump’s Power Plug from the outlet before making any adjustments, changing accessories, or storing the Sump Pump. Such preventive safety measures reduce the risk of starting the tool accidentally. 4. Store idle tools and equipment out of reach of children and other untrained persons. Tools and equipment are dangerous in the hands of untrained users. 5. Maintain t...