Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Supplies Required . . . . . . . . . . . . . . . . . . . . . . . .2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Rough-Ins and Installation . . . . . . . . . . . . . . . . . .4 Cleaning and Maintenance . . . . . . . . . . . . . . . . .5 LD-3071-3 shown LD-3072-3 shown IMPORTANT! Read this entire installation manual to ensure proper installation. When fi nished with the installation, fi le this manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances is the responsibility of the installer. Separate parts from packaging and make sure all parts are accounted for before discarding any packaging material. If any parts are missing, do not begin installation until you obtain the missing parts. Make sure that all water supply lines have been fl ushed and then completely turned off before beginning installation. Debris in supply lines can cause valves to malfunction. Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical power MUST remain off until installation is completed. After installation is complete, turn on the water supply fi rst, then turn on the electrical power. Hardware supplied by installer must be appropriate for wall construction. Wall anchors used must have a minimum pull-out rating of 1,000 lbs. Product warranties and service parts information may be found on our web site at bradleycorp.com. Installation THIS SIDE UP Packing List •••• LD-3071/STD, LD-3072/STD Installation 2 4/1/08 Bradley Corporation • 215-1640; EN 07-1111 Supplies Required: • 3/8" wall anchors, bolts and washers to mount lav deck to wall (minimum pull-out rating of 1,000 lbs.) • 1/2" NPT hot/cold or tempered supply piping • 1-1/2" NPT drain piping • Construction adhesive • OPTIONAL: mounting brackets for Lav Decks (available from Bradley) • OPTIONAL FOR STAINLESS STEEL TRAP COVER: four #10 wall anchors and mounting fasteners (for each cover) suitable for wall construction Optional Components Support Bracket Assembly (S45-2406) 1-1/2" Strainer/Tailpiece (269-1584) 1-1/2" Polypropylene P-trap (269-1697) or 1-1/2" Polished Chrome-Plated Brass P-trap (S29-094) Stainless Steel Trap Cover (186-1769) 5WL Textured Stainless Steel Trap Cover (186-1770) Contact your Bradley representative for Terreon® lav deck and sink options. Installation LD-3071/STD, LD-3072/STD Bradley Corporation • 215-1640; EN 07-1111 4/1/08 3 7-1/2" (191mm) 3 places 11-1/2" (292mm) Optional Centershank Drilling Dim. A: 9-1/2" (381mm) 15" (381mm) 30" (762mm) 30" (762mm) 90" (2286mm) R 2" (51mm) 17-1/2" (445mm) 21" (533mm) 35" (889mm) vessel sink rim height* 34" (864mm) vessel sink rim height* 33" (838mm) vessel sink rim height* Faucets supplied by others Terreon® solid surface deck 12-3/4" 34" (324mm) (864mm) 31" (787mm)* 30" (762mm) ADA•COMPLIANT * Deck rim height to be 31" (787mm) above fi nished fl oor. 1" (25mm) 4" (102mm) 3" (76mm) 2" (51mm) O 1-3/8" (35mm) 3 places A LD-3071-3/STD LD-3072-3/STD 7-1/2" (191mm) 3 places 11-1/2" (292mm) 15" (381mm) 30" (762mm) 30" (762mm) 90" (2286mm) 17-1/2" (445mm) 21" (533mm) 35" (889mm) vessel sink rim height* 34" (864mm) vessel sink rim height* 33" (838mm) vessel sink rim height* Faucets supplied by others Terreon® solid surface deck 12-3/4" (324mm) 34" (864mm) 31" (787mm)* 30" (762mm) ADA•COMPLIANT * Deck rim height to be 31" (787mm) above fi nished fl oor. 4" (102mm) 3" (76mm) 2" (51mm) 5" (127mm) A Optional Centershank Drilling Dim. A: 9-1/2" (381mm) Dimensions Dimensions for three-station lavs are shown. Dimensions for one-station and two-station lavs are similar. LD-3071/STD, LD-3072/STD Installation 4 4/1/08 Bradley Corporation • 215-1640; EN 07-1111 2 Installation Faucets by others Drain and P-trap installation 31" (787mm) Deck Rim Height 4" (102mm) 2" (51mm) 41-1/2" (1054mm) Ref. 41-1/2" (1054mm) Ref. 30" (762mm) 15" (381mm) Ref. 30" (762mm) 15" (381mm) Ref. Hot Cold 25" (635mm) 24-3/4" Waste (629mm) 22" (559mm) (3) places 16" (406mm) (3) places 30-1/2" (775mm) Scribe Line 7-3/4" (197mm) 3-1/2" (89mm) 3-3/4" (95mm) Finished Floor Dim. A* Dim. A* Dim. A* Sink CL Sink CL Fixture CL Scribe a horizontal line 30-1/2" from fi nished fl oor. Position the brackets with Terreon® strip at this height. * For Trap Cover (shown in "right-mounted faucet" position.) Wall-Mount Faucet Dim. A: 8" (203mm) Faucet mount - left of vessel Dim. A: 6-1/2" (165mm) Faucet mount - right of vessel Dim. A: 9-1/2" (241mm) 1 Rough-Ins The vessel sinks are pre-mounted to the deck prior to shipping. Apply construction adhesive to Terreon® mounting strips Installation LD-3071/STD, LD-3072/STD Cleaning and Maintenance for Terreon® Material Description: Terreon® is an NAHB Certified densified ...
Dieses Handbuch ist für folgende Modelle:Plumbing - TERREON LD-3071/STD (548.31 kb)