IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR SMOKER AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR SMOKER. WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR SMOKER. WARNING • • • • • • • • • • • • • • • • • • • • Use smoker only on a hard, level, noncombust

STEP 5: Gourmet Top Handle Installation a. Attach the handle assembly on top of dome lid using 10-24 x s" screws and square nuts. b. Install heat indicator in dome lid by aligning tabs on heat indicator with slots in the opening on the front of dome lid. Insert and turn 4 revolution until the word "IDEAL" on the heat indicator is at the top of the dial. BRINKMANN DALLAS, TX 75244 BRINKMANNDALLAS, TX 75244 OR Cook’N Ca’jun Dome Lid Handle/Heat Indicator Installation c. Attach dome lid handle/heat

Always turn the smoker “OFF” by unplugging cord from electric outlet when adding water and wood, or when finished cooking. • Always allow the smoker and all components to cool completely before handling. • Before smoker can be left unattended, remaining embers and ashes must be removed. Use caution to protect yourself and your property. Place remaining embers and ashes in a noncombustible metal container and completely saturate with water. Allow ashes and water to remain in metal container for 2

CAUTION: A metal bucket must be placed under the grease hole at Smoking all times to catch grease and/or ashes. Check grease level in bucket often and empty or change when w full. Use extreme caution as bottom of cooking chamber, container and contents will be hot. Metal Bucket (not included) Grease Drain Step 1 Place a charcoal grate in firebox. Place cooking grills in cooking chamber. Step 2 Follow instructions below carefully to build a fire in the firebox. You may use charcoal and/or wood as

Do not use gasoline, kerosene, alcohol or other flammable material for lighting charcoal. Follow all manufacturer’s warnings and instructions regarding the use of their product. Place 5 to 6 pounds of charcoal on charcoal pan. Step 2 Saturate charcoal with lighting fluid. With smoker box door open wait 2 to 3 minutes to allow lighting fluid to soak into charcoal. Store charcoal lighting fluid safely away from the smoker. Step 3 With smoker box door open, stand back and carefully light charcoal a

If using charcoal lighting fluid, follow all manufacturer’s warnings andinstructions regarding the use of their product. Use charcoal lighting fluid approved for lighting charcoal ONLY. Do not use gasoline, kerosene or alcohol for lighting charcoal. Place 4-5 pounds of high quality charcoal in charcoal pan. 6. Saturate charcoal with lighting fluid and wait 2 to 3 minutes for fluid to soak in. Store charcoal lighting fluid safely away from grill. 7. Leaving the dome lid off and the door open, car

When charcoal is burning strong, carefully place the hot coals in center of charcoal grate in firebox. 15 INSTR_810-3040-W_SmokeNPit.qxd 12/28/05 12:53 PM Page 17 WARNING: Keep hot coals away from the firebox air shutter to prevent coals from falling out. Step 4 Saturate charcoal with lighting fluid. With lid open wait 2 to 3 minutes to allow lighting fluid to soak into charcoal. Store charcoal lighting fluid safely away from the grill. Step 5 Open the firebox air shutter approximately 1" to 2"

Pour slowly to avoid splashing or overfilling. 4. Set the top cooking grill on the upper support brackets and place food back on the cooking grill. 5. Place the dome lid on smoker body. Plug smoker back into electric outlet and allow food to continue cooking. OPTION 2: Adding Water Through the Side Door 1. Unplug the smoker from electric outlet. 2. Stand back and carefully open side door. Use caution since flames can flare-up when fresh air suddenly comes in contact with fire. Inspect the water

IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR SMOKER AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR SMOKER. WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR SMOKER. WARNING • • • • • • • • • • • • • • • • Only use this smoker on a hard, level, noncombustibl

Do not overtighten hex nut. Step 9 To install air vent damper, open the firebox door and attach damper to inside of firebox door as illustrated. Do not overtighten as this will make the air vent difficult to open and close. Step 10 Close firebox lid and door. Carefully place the firebox on top of the large chamber. Open firebox lid and align the holes of both chambers and secure with 4" x w" bolts. Use two flat washers per bolt as illustrated (one in the firebox and one in the cooking chamber).