30" (76,2 cm) SLEEVE HITCH TILLER ATTACHMENT MODEL NUMBER TS200FR 02480 169689 Rev. 2 4.11.03 TR Printed in U.S.A. SAFETY RULES Safe Operation Practices for Tiller Attachments. TRAINING • Read the operating and service instruction manual care fully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. • Never allow children to operate the equipment. Never allow adults to operate the equipment without proper in

Always wear: S A protective helmet where there is a risk of falling objects S Hearing protection S Approved eye protection Max. speed of output shaft, rpm Beware of thrown objects and ricochets. The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres. Machines fitted with grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. The blade is capable of amputating an arm or leg. Always keep people

1 inch = 25.4 mm 21 REPAIR PARTS TILLER - - MODEL NUMBER 500RTTA (917.296250), PRODUCT NUMBER 954 32 91-72 TRANSMISSION KEY PART NO. NO. DESCRIPTION 1 532 18 06-77 Transmission Assembly (In cludes Key Nos. 2-53) 2 532 18 06-27 Gearcase, L.H. w/Bearing (In cludes Key No. 4) 3 532 16 19-63 Gasket, Gearcase 4 532 00 50-20 Bearing, Needle 5 532 00 13-70 Washer, Thrust 5/8 x 1.10 x 1/32 6 532 13 73-35 Pinion, Input 7 532 14 51-01 Shaft, In put 8 532 12 47-92 Bearing, Needle 9 532 15 44-67 Washer, Sea

530088185 11/11/02 Francais Avant d’utiliser cet appareil, veuillez lire attentivement les instructions et assurez--vous de les avoir comprises. Deutsch Lesen Sie diese Hinweise zur Handhabung des Gerats aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, da. Sie alle Anweisungen verstanden haben. Espanol Lea atentamente las instrucciones y asegurese de entenderlas antes de utilizar esta unidad. R 136/141 ENGLISH FRANCAIS DEUTSCH ESPANOL 2 IDENTIFICATION (WHAT IS WHAT?) 1 2 3 4 5 6 7

101 91 78-95 SYMBOL EXPLANATION Symbols on the power cutter: WARNING! The power cutter can be dangerous! Careless and incorrect use can result in serious or fatal injury to the operator or others. Please read the instructions carefully and make sure you understand them before using the power cutter. Always wear: • Approved protective helmet • Approved hearing protection • Protective glasses or visor Warning Sparks from the cutting blade can cause fire in combustible materials such as: petrol (ga

WARNING: Always discard a blade that is bent, twisted, cracked, broken or damaged in any other way. Never attempt to straighten a twisted blade so that it can be reused. Only use original blades of the specified type. English- ---22 MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s M

101 87 70-27 SYMBOL EXPLANATION Symbols on the power cutter: WARNING! The power cutter can be dangerous! Careless and incorrect use can result in serious, even fatal injury. Read through the Operator's Manual carefully and understand the contents before you use the power cutter. Always use: • A protective helmet • Ear protection • Protective glasses or full face protection Symbols in the Operator's Manual: Checks and/or maintenance shall be carried out with the engine switched off, with the stop

Never use a harness with a defective quick release catch. Quick release On the front is an easily accessible, quick release catch: • Pull out the red strap. • The hip strap and one shoulder strap will be automatically released at the same time and the harness and the engine unit will slide to the ground. Use this if the engine should catch fire or in any other emergency situation when you quickly need to take off the harness and machine. Equal load on shoulders A well matched saw and harness mak

Handle height will be different when tiller digs into soil. • First loosen handle lock lever. • Handle can be positioned at different settings between “HIGH” and “LOW” positions. • Retighten handle lock lever securely after adjusting. FIG. 20 HANDLE (LOW POSITION) TIRE CARE CAUTION: When mounting tires, unless beads are seated, over in fl a tion can cause an explosion. • Maintain 20 PSI (1.4 kg/cm2) of tire pressure. If tire pres sures are not equal, tiller will pull to one side. • Keep tires fr

PRODUCT INFORMATION The owner must be certain that all the product information is included with the unit. This information includes the INSTRUCTION BOOKS, the REPLACEMENT PARTS and the WARRANTIES. This information must be included are followed. MS-3615MA WARRANTY STATEMENT SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company (Husqvarna") warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the Warranty Per