Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool. • Do not allow children or untrained individuals to use this unit. • Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standards and hearing and head protection when operating this unit. • Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of any kind, or go barefoot. • Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. • Keep all bystanders, children, and pets at least 50 ft. away. • Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Do not operate in poor lighting. . Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. • Keep all parts of your body away from any moving part. • When using the attachment on a power head with a gasoline engine, do not touch areas around the muffler or cylinder of the power head. These parts get hot from operation. Failure to heed this warning could result in possible serious personal injury. • Always stop the engine and remove the spark plug wire or disconnect from power supply before making any adjustments or repairs except for carburetor adjustments. • Inspect unit before each use for loose fasteners and damaged or missing parts. Correct before using the tiller attachment. Failure to do so can cause serious injury. • Use only original manufacturer’s replacement parts. Failure to do so may cause poor performance, possible injury, and will void your warranty. • Do not, under any circumstance, use any attachment or accessory on this product, which was not provided with the product, or identified as appropriate for use with this product in the operator’s manual. • Avoid dangerous environments. Do not use the attachment in damp or wet locations. • Do not use in rain. • Use the right attachment. Do not use attachment for any job except that for which it is intended. SAFETY RULES WHEN ATTACHMENT IS ATTACHED TO AN ELECTRIC POWER HEAD . When this attachment is being used with the recommended electric power unit, refer to Electrical Safety Rules in the electric power unit’s Operator’s Manual, in addition to items contained in this manual. . Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Keep cord clear of the working area. . Do not abuse the power cord. Never carry the product by the cord. Never yank the plug out of the receptacle. Keep the cord away from heat, oil, and sharp edges. . Inspect extension cords for deterioration, cuts, or cracks in the insulation. Repair or replace the cords if any defects appear. . Keep the extension cord clear of the working area. Position the cord so that it will not come in contact with the tiller attachment when in use. Failure to do so can result in serious personal injury. ... Check extension cords before each use. If damaged replace them immediately. Touching the damaged area could cause serious injury due to electrical shock. 3 SPECIFIC SAFETY RULES . Rotating tines can cause severe injury, keep all body parts away from rotating tines. . Use extreme caution when reversing or pulling the machine towards you. . Always be sure of your footing; keep a firm hold on the handles and walk; never run. . If the tiller should start to vibrate abnormally or become noisy, stop the motor and check immediately for the cause. Abnormal noise is generally a warning of trouble. . Keep all fasteners tight to be sure the tiller is in safe working condition. . Check that the hitch pins are fully inserted on the tine shaft before each use. . Do not operate power equipment after it has been dropped or damaged. Return it to your nearest authorized servicing dealer for inspection and repair. . Stop the engine whenever you leave the tiller, or when making any repairs or inspections. . Make sure all proper guards and other safety devices are properly and securely attached before using this product. . Be extremely careful when tilling in hard ground. The tines could catch in the ground and propel the tiller forward. . Do not overload the capacity of the machine by attempting to till too deep at too fast a speed. . Inspect the area where the equipment is to be used and remove all foreign objects. . Keep hands, feet, and other body parts away from rotating parts. . Always stop the engine and remove the spark plug wire or disconnect from power supply before installing attachments or making any adjustments. . Before storing the unit, allow the engine to cool. . When not in use, store the tiller in a dry place which is inaccessible to children. . Save these instructions. Refe...