Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Tanaka Dateigröße: 710.11 kb Dateiname: a96a48f2-7a5f-4da4-1977-0ae4a86e2c72.pdf Unterrichtssprache:

• 1028 4thStreet SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212 custsvc@tanaka-ism.com Owner’s ManualTBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See “Maintenance”. WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Always wear eye, head and ear Read, understand and follow all It is important that you read, fully understand and protectors when using this unit. warnings and instructions in this observe the following safety precautions and manual and on the unit. warnings. Careless or improper use of the unit may cause serious or fatal injury. Keep all children, bystanders and Shows maximum shaft speed. Do helpers 15m (50 ft) away from not use the cutting attachment unit. If anyone approaches you, whose max rpm is below the shaft stop the engine and cutting rpm. attachment immediately. 1 custsvc@tanaka-ism.com Owner’s ManualTBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D Do not use metal/rigid Be careful of thrown Gloves should be worn when blades when this sign is objects. necessary, e.g. when shown on the unit. assembling cutting equipment. Blade thrust may occur when the spinning blade contacts a solid object in the critical area. A dangerous reaction Use anti-slip and sturdy footwear. may occur causing the entire unit and operator to be thrust violently. This reaction is called BLADE THRUST. As a result, the operator may lose control of the unit which may cause serious or fatal injury. Blade thrust is more likely to occur in areas where it is difficult to see the material to be cut. Indicates blade guard location for trimmer head or Brain Head. Indicates handle location. Do not attach handle above this point. WARNING! • Read the Operator's Manual and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and /or bystanders. • Objects may be thrown or ricochet in all directions. ALWAYS WEAR EYE PROTECTION. • Keep bystanders at least 50 feet (15m) away. • To reduce the chance of hearing loss, always wear ear protection. • To reduce the risk of injury from loss of control, never use a metal blade on a curved shaft grass trimmer. Never use a metal blade on any brushcutter without barrier bar or bicycle handle configuration and safety strap. • Use of a blade may cause a sudden sideways, forward or backward motion of the brushcutter when the blade contacts a solid object. See Owner's manual for model specific details. 2 custsvc@tanaka-ism.com Owner’s ManualTBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D 1. What is What? Since this manual coves several models, there may be some difference between pictures and your unit. Use the instructions that apply to your unit. 1. Fuel Cap 2. Throttle trigger 3. Starter handle 4. Blade guard 5. Cutting attachment 6. Drive shaft tube 7. Handle bar 8. Suspension eyelet 9. Ignition switch 10. Harness 11. Throttle lock 12. Safety trigger 13. Choke lever 14. Engine 15. Angle transmission 3 custsvc@tanaka-ism.com Owner’s ManualTBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PN TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D.TBC-340PF/D TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PN TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D.TBC-340PF/D 2. Warnings and safety instructions. Operator Safety • Always wear a safety face shield or goggles. • Always wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair so it is above shoulder length. • Do not operate that tool when you are tired, ill or under the influence of alcohol, drugs or medication. • Never let a child or inexperienced person operate the machine. • Wear hearing protection. • Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill. • Keep handles free of oil and fuel. • Keep hands away from cutting equipment. • Do not grab or hold the unit by the cutting equipment. • When the unit is turned off, make sure the engine has stopped before the unit is set down. • When operation is prolonged, take a break from time to time so that you may avoid possible white finger disease, which is caused by vibration. Tool Safety • Inspect the ...

Herunterladen

Geben Sie zwei Ziffern: