Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Echo Dateigröße: 902.26 kb Dateiname: Unterrichtssprache:

13 -Nylon Line Replacement ....................................... 32 Assembly .......................................................................... 14 -Sharpening Metal Blades ....................................... 34 -Drive Shaft/Power Head ........................................ 14 Troubleshooting ................................................................ 35 -Throttle Linkage and Ignition Leads ...................... 14 Storage .............................................................................. 36 -Plastic Shield Installation.......................................15 Servicing Information........................................................40 -Nylon Head Installation ........................................ 15 -Parts ....................................................................... 40 -Front Handle Installation ....................................... 15 -Service .................................................................... 40 -Accessory Installation ........................................... 16 -ECHO Consumer Product Support ................. 40 -Harness Clamp Installation ................................... 16 -Warranty Card ....................................................... 40 -Install Metal Shield ................................................ 17 -Additional or Replacement Manuals ..................... 40 -U-Handle Installation ............................................ 17 -Manual Ordering Instructions ............................... 40 -Muffler Bracket Installation .................................. 20 Pre-Operation ................................................................... 20 Specifications, descriptions and illustrative material in -Operation with Blades ........................................... 20 this literature are as accurate as known at the time of -Fuel ........................................................................ 22 publication, but are subject to change without notice. Illustrations may include optional equipment and CopyRight© 1999 By Echo, Incorporated accessories, and may not include all standard equipment. All Rights Reserved. GRASS TRIMMER/BRUSH CUTTER OPERATOR'S MANUAL GRASS TRIMMER/BRUSH CUTTER OPERATOR'S MANUAL MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. IMPORTANT The enclosed message provides information necessary for the protection of the unit. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders. The circle with the slash symbol means whatever is shown within the circle is prohibited. NOTE This enclosed message provides tips for use, care and maintenance of the unit. SAFETY DECALS DEBRIS SHIELD DECAL Locate these safety decals on your unit. The complete unit illustration, found in the "DESCRIPTION" section, will help you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. Metal Debris ShieldPlastic Debris Shield 4 4 WARNING DANGER • This unit can be dangerous and cause serious injury if improperly used. To reduce injury risk to operator, helpers and bystanders, read and understand the Operator's and Safety manuals. • Blindness can occur from objects that are thrown or ricocheted evenwith shield in place. Operators, helpers and bystanders must wear ANSI Z87.1 approved eye protection. • Always wear hearing protection when operating unit. • Prevent accidental contact with unit and any cutting attachment. Maintain a 15M (50 ft.) radius,DANGER ZONE surrounding the operator. ONLY the operator, dressed in proper protective clothing should be in the DANGER ZONE. • Beware ofKICKOUT (blade thrust) when using blades. Special precautions are necessary for blade operation, see your Operator's and Safety Manuals. ONLY install ECHO approved blades on Brush Cutters (SRM) models equipped with proper blade shield, U-handles, harness, blade collar, nut and cotter pin. • Blade/Cutting attachment does not stop immediately after releasing throttle. Keep hands and feet clear of blade/cutting attachment unless engine is shut off and cutting attachment is not moving. • INSPECT BLADES BEFORE USE. • DO NOT USE DAMAGED, CRACKED, BENT, DULL OR IMPROPERLY SHARPENED BLADES. • Do not remove shields, modify the unit or install attachments or parts not approved by ECHO. Approved attachment information and replacement Operator's and Safety Manuals are available from your ECHO dealer or by writing: ECHO, INCORPORATED, 400 OAKWOOD RD., LAKE ZURICH, IL 60047. INTERNATIONAL SYMBOLS Symbol form/shape Symbol description/ap...

Herunterladen

Geben Sie zwei Ziffern: