Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: RedMax Dateigröße: 581.14 kb Dateiname: Unterrichtssprache:

Be especially careful at this time to check that there is nothing wrong with the blades or with the joints by which the blades are attached to the brushcutter. ■ Things to check before starting up the engine •Take a careful look around to make sure that no obstacles exist within a perimeter of 15 feet (5m) or less around the brushcutter before starting the engine. •The RedMax brushcutter is equipped with a centrifugal clutch mechanism which causes the cutting blades to begin to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the body of the brushcutter onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the blades nor the throttle come into contact with any obstacles when the engine starts up. • Never place the throttle into the high speed position when starting the engine. •After starting up the engine, check to make sure that the blades stop rotating when the throttle is moved fully back to its original position. If the blades continue to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized Red Max servicing dealer for repair. ■ AVOID NOISE PROBLEM I NOTE I Check and follow the local regulations as to sound level and hours of operations for brushcutter. •In general, operate brushcutters between 8a.m.and 5p.m.on week days and 9a.m.to 5p.m.weekends. Avoid using brushcutter late at night and/or early in the morning. [6 ] A Safety Precautions ■ Things to be careful about when using your brushcutter •When using your brushcutter, grip the handles of the brushcutter firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working. • Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary. •Always be sure never to allow other persons to come within the work area while cutting. •Be especially careful not to slip if it is raining or if rain has just stopped, as the ground is likely to be slippery at such times. • If the grass or other object gets caught in the blade during operation, always be sure to turn off the engine before removing the object. •Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Establish a safe method for gaining your attention during operation. Be careful if you are approached. • If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around. •Keep operation area clear of all persons, particularly small children and pets. Injury may result from flying debris. •Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock. •Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. These metallic parts reach high temperatures during operation and doing so could result in serious burns. • When you finish cutting in one location and wish to continue work in another spot, turn off the engine, place the protective cover over the blades, and turn the brushcutter so that the blade face away from your body before carrying it to the new location. • Never transport the brushcutter over rough roads over long distances without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport. [7 ] A Safety Precautions ■ Notes on care and maintenance of your brushcutter • In order to maintain your brushcutter in proper working order, perform the maintenance and checking operations described in this manual at regular intervals. In the event that any parts must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance. •Under no circumstances should you ever take apart the brushcutter or alter it in any way. Doing so might result in the brushcutter becoming damaged during operation or the brushcutter becoming unable to operate properly. •Always be sure to turn off the engine before performing any maintenance or checking procedures. •When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury. • When replacing blade or any other parts or when replacing the oil or any lubricants, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax brushcutter. • Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for...

Herunterladen

Geben Sie zwei Ziffern: