Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: McCulloch Dateigröße: 1.15 mb Dateiname: Unterrichtssprache:

General description 1) ENGINE 2) SHAFT 3) THROTTLE TRIGGER 4) RIGHT CONTROL HANDLE 5) BLADE 6) NYLON STRING HEAD 7) STOP SWITCH 8) CHOKE 9) STARTER HANDLE 10) HARNESS RING 11) SPARK PLUG 12) AIR FILTER COVER 13) FUEL TANK CAP 14) MUFFLER SHIELD 15) ENGINE/SHAFT JOINT 16) DELTA HANDLE 17) REAR CONTROL GRIP 18) SAFETY GUARD 19) SAFETY LEVER 20) SAFETY POLE GUARD 21) STRING CUTTER BLADE 22) NYLON STRING HEAD GUARD EXTENSION 23) BLADE GUARD 24) ATTACHMENT 25) LOCKING PIN 26) SHAFT / ATTACHMENT JOINT 27) LOCKING PIN HOUSINGS 28) JOINT KNOB Example of identification label LEGEND: 1) Guaranteed noise level according to directive 2000/14/EC 2) Manufacturer's name and address 3) Year of manufacture 4) Product code 5) Serial no. 6) Model/type 7) CE marking of conformity 8) Displacement B. Safety precautions Explanation of Symbols Warning Safety apparel: Approved protective goggles or visor, approved hard hat and hearing protection. Read the instructions for the user carefully and make sure you understand how all the controls work. Safety apparel: Approved gloves. Safety apparel: Approved boots. Do not smoke when refueling or using the machine. Choke Danger of flying debris. ENGLISH - 1 Minimum safety distance 15m. Emergency stop. Maximum shaft speed. Use of the manual • Anyone who uses the machine should have read the entire manual with extreme care. • All users should be familiar with the operations for use of the machine under absolutely safe conditions as described in this manual, and should be instructed in the proper cutting techniques to use, possibly by practical demonstration. • Do not allow children or persons who are not familiar with these instructions and are not sufficiently trained to use the brush cutter. Local regulations may specify an age limit for users. • Keep this manual with the machine when selling or lending it, to enable the future users to familiarize themselves with the product and instructions for safe use. • All parts of the manual are equally important for the purpose of preventing injury to the operator or damage to the machine. To facilitate your reading, section B is divided into parts that can be called up in the rest of the manual, marked with the "CAUTION" symbol followed by the number of the corresponding paragraph, to concentrate your attention on the main safety procedures related to a particular situation. Prior to use • Respect of the procedures described in this manual does not eliminate the risks of accidents but does reduce the probability of their occurring or the effect of the damage. • If you have never used a brush cutter before, practice using it for a while before actually starting to work with it. • The operator or user is responsible for any damages to third parties or their property, and for any dangers to which they may be subject. • Do not use this machine for any other purpose than that for which it was designed, using the proper cutting devices as indicated in the instructions. • Do not use the machine if you are tired, in poor health or under the effects of alcohol or medication that could affect your reactions. • Make sure you know how to stop the engine and blade if necessary (see section entitled "Starting and stopping the engine"). Danger of kickback. The blade is capable of amputating arms and legs. CAUTION! Danger of serious leg injuries. Take scrupulous care to follow the instructions in the manual. CAUTION! The cutting parts and muffler may get very hot and cause burns. Wait a w minutes before touching them. Make sure the machine is correctly assembled, and all its parts are working properly. Make sure the screws are all in place and securely tightened. Check operation of the accelerator control block and make sure there is no leakage of fuel. Check that the cutting tool does not move with the motor running at idle speed. Make sure the transmission pipe is properly fastened to the motor joint and the line cutter head or blade are correctly fastened with the screw fastening the blade fully tightened. 2 Replace any accessories (blades, nylon string heads, guards) which show damage or cracks or appear excessively worn. Have yo...

Herunterladen

Geben Sie zwei Ziffern: