Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Honda Power Equipment Dateigröße: 646.33 kb Dateiname: billygoat500264F101001a.pdf Unterrichtssprache:

F101001A Operator Owner's Manual T h a n k Y o u f o r S e l e c t i n g 1 3 Specifications The Powerful BC2401 SELF-PROPELLED BRUSH CUTTER UNIT SIZE: OVERALL LENGTH: 82.5"(2.09 m) OVERALL WIDTH 32.0" (0.81m) OVERALL HEIGHT43" (1.09m) ACCESSORIES NUT REPLACEMENT KIT P/N 500208. To replace stripped or damaged insert nuts in engine base. BLADE BC2401 P/N 500210. Original Equipment Blade for replacement. BELT TRACTION DRIVE P/N 500119. Traction Drive Belt for BC2401 BELT BLADE DRIVE P/N 500237. Blade Drive Belt for BC2401 BC2401IC, BC2401H, BC2401HE BC2401IC BC2401H BC2401HE ENGINE: H.P. 10.5 (7.83 kW) 11 (8.20 kW) 11 (8.20 kW) ENGINE: TYPE B&S HONDA HONDA ENGINE MODEL NO: 28B702118-E1 GXV340K1DX3 GXV340K1DE33 ENGINE: FUEL CAP. 3.0 qt. (2.84 L) 2.3 qt. (2.18 L) 2.3 qt. (2.18 L) ENGINE: OIL CAP. 1.34 qt. (1.41 L) 1.20 qt. (1.13 L) 1.20 qt. (1.13 L) WEIGHT: UNIT 282# (128.5 kg) 278# (126.1 kg) 282# (127.9 kg) WEIGHT: SHIPPING 310# (141.3 kg) 306# (138.8 kg) 310# (140.6 kg) ENGINE WEIGHT: 66.0# (30.0 kg) 70.5# (32.0 kg) 72.5# (32.9 kg) MAX. OPERATING SLOPE 15° 20° 20° 2 BLADE HIGH LIFT BC2401 P/N 500102. Optional blade for replacement Part No. 500264 Form No. F101001A WARNING: DO NOT 1. DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and deadly poison. 2. DO NOT place hands or feet near moving or rotating parts. 3. DO NOT store, spill or use gasoline near an open flame, or devices such as a stove, furnace, or water heater which use a pilot light or devices which can create a spark. 4. DO NOT refuel indoors where area is not well ventilated. Outdoor refueling is recommended. 5. DO NOT fill fuel tank while engine is running. Allow engine to cool for 2 minutes before refueling. Store fuel in approved safety containers. 6. DO NOT remove fuel tank cap while engine is running. 7. DO NOT operate engine when smell of gasoline is present or other explosive conditions exist. 8. DO NOT operate engine if gasoline is spilled. Move machine away from the spill and avoid creating any ignition until the gasoline has evaporated. 9. DO NOT transport unit with fuel in tank. 10. DO NOT smoke when filling fuel tank. 11. DO NOT choke carburetor to stop engine. Whenever possible, gradually reduce engine speed before stopping. 12. DO NOT run engine at excessive speeds. This may result in injury laws apply on federal lands. 21. DO NOT touch hot muffler, cylinder, or fins because contact may cause burns. 22. DO NOT run engine without air cleaner or air cleaner cover. 23. DO NOT operate during excessive vibration! 24. DO NOT leave machine unattended while in operation. 25. DO NOT park machine on a steep grade or slope. WARNING: DO 1. ALWAYS DO remove the wire from the spark plug when servicing the engine or equipment TO PREVENT ACCIDENTAL STARTING. 2. DO keep cylinder fins and governor parts free of grass and other debris which can affect engine speed. 3. DO pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury. 4. DO examine muffler periodically to be sure it is functioning effectively. A worn or leaking muffler should be repaired or replaced as necessary. 5. DO use fresh gasoline. Stale fuel can gum carburetor and cause leakage. 6. DO check fuel lines and fittings frequently for cracks or leaks. Replace if necessary 7. Follow engine manufacturer operating and maintenance instructions. 8. Inspect machine and work area before starting unit. SAFETY INSTRUCTIONS GENERAL SAFETY ASSEMBLY LIT. BAG & CONTROLS LABELS OPERATION MAINTENANCE PARTS DRAWING & LIST TROUBLESHOOTING WARRANTY PROCEDURE Page 2 of 12 TABLE OF CONTENTS 10 - 12 12 12 6 - 8 4 4 3 3 2 OPERATOR VIBRATION SOUND TESTS VIBRATION LEVEL 1.1g Vibration levels at the operators handles were measured in the vertical, lateral, and longitudinal directions using calibrated vibration test equipment. Tests were performed on 05/19/95 under the conditions listed: WIND SPEED: WIND DIRECTION: HUMIDITY: TEMPERATURE: BAROMETRIC PRESSURE: GENERAL CONDITION: SOUND Sound tests conducted were in accordance with 79/113/EEC and were performed on 05/19/ 95 under the conditions listed: GENERAL CONDITION: 30.06" Hg (763mm Hg) 67% South 5 MPH (8 kmh) WIND SPEED: WIND DIRECTION: HUMIDITY: TEMPERATURE: BAROMETRIC PRESSURE: Sunny 30.06" Hg (763mm Hg) 67 % S.W. 5 MPH (8 kmh) 72 °F (22.2 °C) Sunny 6 7 8 THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & ENGINE MANUAL.” & /or damage to unit. 13. DO NOT tamper with governor springs, governor links or other parts which may change the governed engine speed. 14. DO NOT tamper with the engine speed selected by the engine manufacturer. 15. DO NOT check for spark with spark plug or spark plug wire removed. Use an approved tester. 16. DO NOT crank engine with spark plug removed. If engine is flooded, pla...

Herunterladen

Geben Sie zwei Ziffern: