Stimmen - 0, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS Contents List items MODELS 2400/ 24001E 2410/ 24101E 1 - Power Head V V 1 • Drive Shaft Assembly V V 1 - PlasticBag (co-pack) V >/ -1, Operator's Manual V V -1, Safety Manual V V -1, Warranty Registration Card V V • 1, Limited Warranty Statement V V -1, Plastic shield V V -1,Tool Bag V V -1, 8mm x 10mm wrench V V -1, scrench V V -1, locking tool V V -1. baa of 10 cotter pins V -1, Nylon Trimmer Head V V >1, Safety Goggle V V -1,2-Stroke Oil Sample, 2.6 oz. V V -1, Shoulder Harness w/hip pad V -1, Shoulder Harness w/o hip pad -1, Front Handle (L.H.) V -1, Plastic Bag V V -1, shield plate V V -3,5mm x 15mm screws (shield mtg.) >I < -4,5mm x 35mm screws (handle mtg.) V V —4,5mm nuts (handle mtg) V V —1. 3mm Hexaqon Wrench (forground wire inst.) V V -1, Front Handle Support V -1, Plastic Bag (for blade use only) V -1, metal shield V -1, bracket -1, plastic bag V —4,5mm x 35mm screws (handle mgt.) V —4,5mm nuts V -1, Plastic Bag V -3, 5mm x 15mm screws (shield mount) V - 2,5mm x 8mm screws (bracket to shield) V -4,5mm nuts V -4,5mm lockwashers îOffUECHO. BLADE TERMS & DEFINITIONS — EMISSION CONTROL Blade Convertible Models (SRM-2400) can be converted to utilize blades. Plastic/nylon blades require a, "Blade Conversion Kit", which includes a shoulder harness, and steel shield with necessary attaching hardware. Steel/metal blade also require the, "Blade Conversion Kit", plus a "U-Handle Kit" must be installed. Dedicated Blade Capable Models (SRM 2410) include both the "Blade Conversion Kit", and "U-Handle Kit". Emission Control Label located on Engine (EXAMPLE ONLY, information on label varies by FAMILY). The emission control system for this engine is EM (Engine Modification). IMPORTANT ENGINE INFORMATION ENGINE FAMILY: TEH0240824RC DISPLACEMENT: 23.6cc THIS ENGINE MEETS U.S. EPAPH1 AND 1995-1998 CALIFORNIA EMISSION REGULATIONS FOR ULGE ENGINES. REFER TO OWNER’S MANUAL FOR MAINTENANCESPECIFICATIONS AND ADJUSTMENTS. KIORITZ CORP. SAFETY VIDEO o Grass Trimmer/Brush Cutter a a Operator's Manual ' » 1. SAFETY MANUAL - Included in plastic bag (co-pack). Read before operation and keep in a safe place for future reference to learn proper, safe operating techniques. 2. OPERATORS MANUAL * Included in plastic bag (co-pack). Read before operation and keep in a safe place for future reference, i.e., operation, maintenance, storage and specifications. 3. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Starter. 4. DRIVE SHAFT ASSEMBLY - Includes the Rear (right hand) Handle assembly, Gear Housing assembly, Loop (front, left hand) Handle assembly, Flexible Drive Cable (SRM-2450 has a solid steel drive shaft) and Safety Decal. 5. PLASTIC DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use, see Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Gear Housing Assembly just above the cutting attachment. Helps protect the operator by deflecting debris produced during the trimming operation. This shield must be replaced with the steel shield for blade use. 6. NYLON CUTTER HEAD - Contains replaceable nylon trimming line that advances when the trimmer head is tapped against the ground while the head is turning at normal operating speed. 7. CUT-OFF KNIFE - Trims line to the correct length: 5" from head to end of line after head is tapped on the ground during operation and the line advances. If trimmer is operated without a cut-off knife the line will become too long. If the line is more than the listed length the operating speed will slow, the engine overheat and engine damage may occur. 8. LOOP HANDLE - The Loop (front) handle is not assembled to the Drive Shaft assembly (some models) and must be positioned for proper cutting attitude and operator comfort. 9. IGNITION SWITCH- "SLIDE SWITCH" mounted on top of the Throttle Trigger Housing. Move switch FORWARD to RUN, BACK to STOP. 10. GRIP - Rear (right hand) handle. 11. THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique. DO NOT hold trigger while starting. 12. SHOULDER HARNESS- An adjustable strap that suspends the unit from the operator. Using the strap reduces operator fatigue. 13. AIR CLEANER - Contains replaceable filter element. 14. PURGE BULB - Before starting and after filling the fuel tank, pump purge bulb 3-4 times or until a steady stream of fresh fuel without air is visible through the "clear” fuel return line. 15. CHOICE - The choke control lever is located on the top of the choke case. Pull choke knob up to close the choke for cold starting. Push knob down for the "RUN” position. 16. STARTER HANDLE - Pull handle slowly until starter engages, ...
Dieses Handbuch ist für folgende Modelle:Gartengeräte - SRM-2410 (1.49 mb)