Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
This Manual is not intended to be complete or to replace the original Happy Voyager User/Operation Manual. Its purpose is solely to educate the Bernina Happy Voyager Machine Operators. This Manual is copy right protected © 2007 Bernina of America, Inc. and subject to changes without notice. Publication, and duplication or providing information to a third party without the written approval from Bernina of America, Inc. is prohibited. BERNINA OF AMERICA, INC. 3702 PRAIRIE LAKE CT. AURORA, IL 60504 Authors: Hans Herzog Andrew Bellendir October 2007 Release: 1.10 Happy Voyager Main Catagories Index Bernina Manual HV Manual Contol Panel Interface Control 01 3-8,3-9 & 3-B Drive Mode 02 3-A Menu Mode 03 none Happy and Bernina Embroidery SoftwareV5 Metric Dimension Settings 04 none Creating Hoops for the HV none Embrodiery Pattern Management Transferring Patterns using Happy Link 06 5-4 Transferring Patterns using a Memory Card 07 5-5,5-6 & 5-7 Transferring Patterns from the Machine to a Card 08 none Locking Pattern 09 11-1 Deleting Pattern 5D, 5C & 5E Most Common Tasks Selecting a Design 11 5-A Programming Thread Colors for the Needles 12 13-3 & 13-4 Programming Thread Colors for the Design 13 13-5 & 13-6 Positioning the Design in the Hoop/Creating Hoops 14 20-2 & 20-3 Using the Trace Function 6-4 Forward and Backward Tracking. 16 3-8 & 3-9 Design Mulipulations Scaling the Size of the Pattern 17 12-2 Rotating/Mirroring Design 18 9-5 Adjusting the Satin Stitch Width and Pull Compensation 19 12-3 Removing Unwanted Jump Stitches 19-1 to 19-9 & 19-A Embroidering Multiple Designs 21 12-5 & 12-6 Adding Devices/Accessories Installing the Cap Device/Machine Set Up 22 7-1 to 7.9 & 7A, B & C, 20-4 to 20-6 Installing the Hoop Tech Device/Machine Set Up 23 none Additional Machine Settings Reversing Directions of Frame Movements 24 5-1 Single Needle Color Transfer 13-2 Pattern Color Transfer 26 13-5 & 13-6 Start Embroidering from a Particular Stitch 27 9-6 Start Embroidering from a Particular Color 28 9-7 Service Tasks Machine Maintenance, Cleaning/Lubrication 29 23-1 & 23-2 Thread Cutting Length 5-1 Machine Firmware Version 31 22-3 System Reset 32 25-1 Speed Reset 33 25-2 Happy Voyager Interface Control Description of function Identifying and explaining the functions of the keys/buttons on the control box. ARROR Keys (Up, Down, Left, Right): • In the DRIVE mode move the hoop. • In the MENU mode used to navigate to desired item. SET button: Select and execute a function. MENU button: Enter the menu mode. (also enter into submenu’s). ESC button: Stop or cancel a selected setting. (Used to escape out of a menu or function.) FF button (Fast Forward): In conjunction with the arrow keys increases frame movement speed for faster tracking. +/-buttons: Plus/minus buttons increases and decreases the machine embroidery speed. ARROR button (Left/Right): Moves the sewing head in the desired direction. (Moves between needles 1 - 12.) P FOOT button: Raises and lowers the presser foot. (Useful in positioning the needle at a precise point in the design. i.e. after a thread break) Process: Lower the presser foot, then manually pull down the needle. Perform a CUT to return to normal embroidery position.) TRACE button: Verify that the pattern selected embroiders within the boundaries of the hoop. (See: “Using the TRACE function”.) Happy Voyager Interface Control CUT button: Cut the upper and lower thread. START button: Start to embroider Note: If held down while embroidering, the machine temporarily switches into a super slow mode. When released the speed returns to the previous embroidery speed. STOP button: Stop the embroidery process. Additional functions are different Back tracking modes. 4 Modes of back tracking: Press once: Frame moves backwards one stitch. Press continuously: Frame moves backwards continuously. Keep pressing continuously: The button function locks, the frame moves backwards by 1 stitch at a time continuously. Stop button must be pressed to stop. Keep pressing longer still: The button function locks, the frame goes back in multiples of 10 stitches at a time continuously. Stop button must be pressed to stop. FWD button: Forward Tracking 4 Modes of moving forward in a pattern: Press once: Frame moves forwards one stitch. Press continuously: Frame moves forwards continuously. Keep pressing continuously: The button function locks, the frame moves forward by 1 stitch at a time continuously. Stop button must be pressed to stop. Keep pressing longer still: The button function locks, the frame moves forwards by multiples of 10 stitches at a time continuously. Stop button must be pressed to stop. Happy Voyager Interface Control FUNC button: The function button opens to a menu with additional functions. Use the arrow keys to move to the desire function and SET to execute. Explanation of Functions: TOP: Returns frame to the top of the pattern. CENTER: Moves the frame to the center. ORIGIN: Moves the frame to the start point. POSTITIO...