Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Note the ribbon cable shown furthest left that is labelled "ST992". Gently remove this and the other two ribbon cables. 3) The PNE-C2 plugs are in the same general location as the three standard input plugs. Plug in the cable "ST992" first. Be sure to fully seat each connector, applying even pressure across the top. Do not stress the wires. 4) Gently guide the PNE-C2 module back into the amplifier, and fasten the four mounting screws. ASHLY www.ashly.com...