Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Check the surround effects of the various modes before selecting the surround mode. Speaker setting examples Here we describe a number of speaker settings purposes. Use these examples as guides to according to the type of speakers used and purpose. [1] DTS-ES compatible system (using surround back q Basic setting for primarily This is recommended regular single way Front speakers Center speaker Subwoofer Surround back speakers 60° Monitor [ As seen from above ] Surround speakers 60° Surround speaker Front speaker 2 to 3 feet [ As seen from the side ] Surround back speaker Point slightly downwards • Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible. Set the center speaker between the front left and right speakers and no further from the listening position than the front speakers. • Consult the owner’s manual for your subwoofer for advice on placing the subwoofer within the listening room. • If the surround speakers are direct-radiating (monopolar), then place them slightly behind and at an angle to the listening position and parallel to the walls at a position 2 to 3 feet ear level at the prime listening position. • When using two surround back speakers, place back facing the front at a narrower distance than and right speakers. When using one surround back speaker, place it at the rear center facing the front position 0 to 0.7 feet than the surround •We recommend installing the surround slightly downward facing angle. This effectively prevents the surround back channel signals screen at the front center, resulting in interference the sense of movement Additional Information w Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment, diffuse radiation speakers such as bipolar types, or dipolar types, provide a wider dispersion than is possible to obtain from a direct radiating speaker (monopolar). Place these speakers at either side of the prime listening position, mounted above ear level. Path of the surround sound from the speakers to the listening position Surround speakers 60° Surround back speakers [ As seen from above ] Surround speaker Front speaker 2 to 3 feet [ As seen from the side ] Surround back speaker Point slightly downwards • Set the front speakers, center speaker and subwoofer same positions as in example (1). • It is best to place the surround speakers directly slightly to the front of the viewing position, above the ears. • Same as surround back speaker installation dipolar speakers for the surround effective. • The signals from the surround shown in the diagram above, realistic surround sound 53 ENGLISH ENGLISH Additional Information [2] When not using surround back speakers • Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible. Set the center speaker between the front left and right speakers and no further from the listening position than the front speakers. • Consult the owner’s manual for your subwoofer for advice on placing the subwoofer within the listening room. • If the surround speakers are direct-radiating (monopolar), place them slightly behind and at an angle to the listening position and parallel to the walls at a position 2 to ear level at the prime listening position. Additional Information 2 Dolby Digital compatible media and playback methods Symbol indicating Dolby Digital compatibility: The following are general examples. Also refer to the player’s operating instructions. Playback method (reference page) Dolby Digital output terminalsMedia Dolby Pro LogicDolby DigitalComparison of home surround systems The AVR-1906 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. [1] Dolby Surround q Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to “5.1” channels – front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects (the Low Frequency Effects –LFE– channel, also called the “.1” channel, containing bass frequencies of up to 120 Hz). Unlike the analog Dolby Pro Logic format, Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion. 2 Dolby Digital and Dolby Pro Logic No. of recorded channels (elements) No. of playback channels Playback channels (max.) Audio processing High frequency playback limit of surround channel 5.1 ch 5.1 ch L, R, C, SL, SR, SW Digital discrete processing Dolby D...