Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Fotos und technische Daten Denon AVR-1908 |
Anleitung Zusammenfassung
f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. g Manual EQ Adjust tonal quality for each speaker using graphic equalizer. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Selectable items] ON : Compression is used. Select this if sound from front speakers is distorted. OFF : Do not use compression. This is the recommended setting. • Set this to “ON” if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. • The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below. q Analog and PCM 2-channel signals w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.) • When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed. Base Curve Copy Copy the Room EQ.s “Audyssey Flat” correction curve. [Selectable items] Yes No “Base Curve Copy” is displayed after the auto setup procedure has been performed. Adjust CH Select speaker adjustment method. [Selectable items] L/R CHALL CH Each CH : Adjust tonal quality for each speaker separately. : Adjust tonal quality for each L/R speaker pair. : Adjust tonal quality for all speakers together. Manual EQ Select the speaker and frequency band and adjust the level. [Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz [Variable range] –20dB ~ 0dB ~ +6dB Default Resets the settings to the default values. ENGLISH Zone2 Setup Make settings for audio playback in a ZONE2 system. F Menu screen F 2.Manual Setup 2.HDMI Setup 1.Speaker Setup 4.Zone2 Setup 5.Option Setup 3.Audio Setup 2-4.Zone2 Setup Level Lch : 0dB Rch : 0dB Vol.Limit : OFF Power On Lev.: Last Mute Lev. : Full a Lch Level Adjust the left channel output level. [Variable range] –12dB ~ 0dB ~ +12dB s Rch Level Adjust the right channel output level. [Variable range] –12dB ~ 0dB ~ +12dB d Volume Limit Make a setting for maximum volume. [Selectable items] OFF –20dB –10dB 0dB : Do not set a maximum volume. : Set the maximum volume to –20 dB. : Set the maximum volume to –10 dB. : Set the maximum volume to 0 dB. f Power On Level Define the volume setting that is active when the power is turned on. [Selectable items] Last – – – : Use the memorized setting from the last session. : Always use the muting on condition when power is turned on. –70dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. g Mute Level Set the amount of attenuation when muting is on. [Selectable items] Full –40dB –20dB : The sound is cut off entirely. : The sound is attenuated by 40 dB. : The sound is attenuated by 20 dB. Option Setup Make various other settings. F Menu screen F 2.Manual Setup 2.HDMI Setup 1.Speaker Setup 4.Zone2 Setup 5.Option Setup 3.Audio Setup 2.Vol.Control 3.Source Delete 4.On-Screen Display 5.Quick Select Name 6.Remote ID Setup 7.Display 8.Setup Lock 1.Amp Assign 2-5.Option Setup aAmp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the main zone) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). [Selectable items] 7.1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp 2ch For details, see “Amp Assign / Multi-zone Connections and Operations” (vpage 52 ~ 54). Getting Started Connections Setup Playback Remote Control Multi-Information Troubleshooting ENGLISH Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting s Volume Control Set the main zone volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] OFF –20dB –10dB 0dB : Do not set a maximum volume. : Set the maximum volume to –20 dB. : Set the maximum volume to –10 dB. : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the main zone’s power is turned on. [Selectable items] Last – – – : Use the memorized setting from the last session. : Always use the muting on condition when power is turned on. –80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. [Selectable items] Full –40dB –20dB : The sound is cut off entirely. : The sound is attenuated by 40 dB. : The sound is attenuated by 20 dB. d Source Delete...