Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Screen Display Button System Adjust Button Direct-digit Choosing Button Directly select channel numbers Lock Setting button Used for setting lock for channelsearching, channel,AV and clock,etc. Picture Mode Select Button There are DYNAMIC, STANDARD, MILD,MEMORY, PICTURE MUTEand COLOR MUTE six modes of picture. Menu Select/ Adjust Button Use this button to adjust the menu, the volume and the channels, as well as to control the game. Chromaic Belt Length Adjust Button (not available) Program Play-forward Button Calendar Game Background Select Button BAR Button(not available) Fire Button(can call the calendar) Background Lamp Control Button (not available) Restart Game Button Game Exit Button Program Play-backward Button Chromatic Belt Width Adjust Button (not available) Sound Mode Select Button There are high,normal and low three kinds of sound modes. Stopwatch Button The stopwatch can work 1 hour without interruption and when you use this function,do not operate other function button as well. Digit Select Button Change the channel position number between one digit, two-digits and three -digits. Program Scan Button DC Standby Button Sleep Timer Button Power On and Power Off Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control. Power on/off Signal receiver Power indicator Power switch TV/AV Menu switch Volume Channel up/ down position up/down DC Standby Button Direct-digit Choosing Button Connect/disconnect to the power 1.Connect the power supply wire, then press power switch button, the red power indicator will light, in several seconds the picture will appear on the screen. 2. If the TV is in the state of standby, press the button on the remote control. NOTE 1.You can also press the 0-9 button to call off the standby status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 9-12). 2.When you do not use the remote control, you can directly press the the button on the television to call off the standby status. 3. Press the button on the remote control to get into the standby state. 4. Press the button on the TV set to completely turn off the TV. Power supply auto-off function When the B.B(black background) is set ON, and there is no signal , game screen protection works, and ,in15 minutes later, it will change into standby status. Viewing TV Programs The channels amount to 218(0-218). Viewing TV programs Direct-digit Choosing button Digit Select button PRE BACK SYSTEM MENU CH+ CHVOLVOL+ How to select the TV program 1.Use the direct-digit choosing button Press the button from 0-9 to select a one digit channel. If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel. If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel. If the channel position number you select is larger than 218, the TV will use the first two number as the channel position. 2.Use CH+/- button Press CH+ to increase the channel position number. Press CH- to decrease the channel position number. 3.Use PRE button and BACK button Press PRE button, you can go back to the channels you viewed (as many as four). Then, press Back button, you can return to the channels you were watching just now (as many as four) . For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the Back button to return to channel 7. Choose the proper volume you like Press VOL+/- button to adjust the volume. If tne VOL STORE is set ON, the volume of the pre-fifty channel will be stored independently. VOLUME Press VOL+ to increase the volume, press VOL- to decrease the volume. If the color or sound of one channel is abnormal It might be because the color or sound system has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see COLOR AUTO SOUND DK the form. select adjust If the color of the picture is abnormalPress CH+/- button, and move the indicator to COLOR, and press VOL+ button to select the proper color(AUTO,PAL, SECAM,NTSC4.43 and NTSC3.58 will appear alternately). If the sound is abnormal Press CH+/- button, and move the indicator to SOUND, and press VOL+/- button COLOR AUTO to select the proper sound (DK and BG will SOUND DK adjust appear alternately). select Viewing TV Programs(coutinued) Program scanning function is to let the television automatically scan all preconcerted channel program(about two seconds per channel). .UA.a.AA.°.AA»IOEAUProgram scan and screen display SCAN DISP Program scanning function 1.If you want to scan the programs and se...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - 25T3A-T (2.13 mb)