Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Arcam Dateigröße: 1.2 mb Dateiname: cc743ff4-94af-4573-9788-928169c2d976.pdf Unterrichtssprache:

13. Non-use periods When using the stand-by function, a small amount of current will continue to flow into the unit. Unplug the power cord of a unit from the outlet if it is to be left unused for a long period of time. 14. Abnormal smell If an abnormal smell or smoke is detected from a unit, turn the power off immediately and unplug the unit from the wall outlet. Contact your dealer for further advice. 15. Servicing You should not attempt to service these products beyond that described in this handbook. All other servicing should be referred to qualified service personnel. 16. Damage requiring service These products should be serviced by qualified service personnel when: A. the power-supply cord or the plug has been damaged, or B. objects have fallen, or liquid has spilled into the appliance, or C. the appliance has been exposed to rain, or D. the appliance does not appear to operate normally or exhibits a marked change in performance, or E. the appliance has been dropped or the enclosure damaged. Safety compliance These products have been designed to meet the IEC 60065 international electrical safety standard. Using this handbook Thank you for buying this quality Arcam product. This handbook covers the following items: < C31 pre-amplifier; < P35 power amplifier; < P1 power amplifier. This handbook is intended to give you all the information you need to install and use these products. The C31 is described first, followed by the P35 and the P1. Use of the CR-389 remote control supplied with the C31 is also described. If your amplifiers have been installed and set-up by an authorised Arcam dealer, you may wish to go directly to the sections on how to use this equipment. Otherwise we recommend reading carefully the installation instructions for your products before proceeding. Safety Safety guidelines are set out on page 2 of this handbook. Many of these items are common-sense precautions but, for your own safety and to ensure that you do not damage the unit, we recommend that you read them. Contents Safety guidelinesE-2 Important safety instructionsE-2 Safety complianceE-2 Using this handbookE-3 SafetyE-3 Installation: C31 pre-amplifierE-4 Positioning the unitE-4 Connecting to other equipmentE-4 Connecting to a power supplyE-5 Switching the C31 onE-6 Changing the volumeE-6 Selecting an audio sourceE-6 Using your C31 pre-amplifierE-6 Recording an audio sourceE-7 Listening using headphonesE-7 Product configurationE-7 Configuring your C31 pre-amplifierE-8 IntroductionE-8 Adjusting listening settingsE-8 Using the remote controlE-9 Installation: P35 and P1 power amplifiersE-10 Positioning your power amplifierE-10 Connecting to other equipmentE-10 Remote switchingE-11 Connecting loudspeakersE-12 Connecting to a power supplyE-13 Using your power amplifierE-14 Technical specificationsE-15 Remote-control codesE-16 TroubleshootingE-17 GuaranteeE-17 On-line registrationE-17 Environmental matters: This handbook is printed in the U.K. on recycled paper, and is itself fully recyclable and biodegradeable. The paper used is from the ‘Revive’ range of papers, manufactured in the U.K. by Robert Horne. In Revive, 75% of the paper is de-inked post-consumer waste, with the remaining 25% being mill broke and virgin fibre. The recycled pulps used in the production of this paper are a combination of Totally Chlorine Free (TCF) giving zero AOX and Elemental Chlorine Free (ECF) giving a resultant AOX level of less than 0.5Kg per 1000Kg of pulp. English C31/P35/P1 E-5 Recording loops The C31 is equipped with two recording loops, for use with recording devices (such as cassette decks, MiniDisc players, VCR’s etc.) 7 TAPE/PROC RECORD OUT – Connect these output sockets to the input sockets of your recording device (usually labelled RECORD or IN). 8 TAPE/PROC PLAY IN – Connect the output sockets of your recording device (usually labelled PLAY or OUT) to these inputs. If you do not have a recording device, you can use this input for other (line-level) equipment, such as a CD-player, tuner, VCR, etc. 9 VCR/TAPE2 RECORD OUT – These output sockets can be connected to the input sockets of a second recording device. bk VCR/TAPE2 PLAY IN – Connect the output sockets of your second recording device to these inputs. Alternatively, this input may be used for other (line-level) equipment such as a CD-player, tuner, etc. Power-amplifier connections 456 PRE OUT – The recommended connection between the C31 pre-amplifier and your power amplifier depends on both the distance between the two and the type of power amplifier that you are using. There are three options: 1. If the cables to be used to connect the C31 to the power amplifier are less than 3m long, we recommend connecting the DIRECT sockets 6 to the input sockets of your power amplifier. On the P35 and P1, connect to the socket(s) labelled AUDIO IN. If the cables to be used to connect the C31 to the power amplifier are 3m or longer, then the connection to use depends on the type of power amplifie...

Herunterladen

Geben Sie zwei Ziffern: