Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
11. Only use attachments/accessories specified by the manufacturer. 12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Warning: Shock Hazard - The lightning flash within an equilateral triangle, intended to alert the user to the presence of un-insulated “Dangerous voltage” within the products enclosure that may be of significant magnitude to constitute a risk of electric shock to persons Read Accompanying Documentation – The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 15. The fuse should only be replaced with a T8AL250V fuse. 16. The RCA, RJ11and RJ45 Jacks shall only be used for their intended use. Refer to accompanying documentation to insure that they are being used as intended. 17. The spring clip terminals and F-connector on the tuner module should only be used to connect an AM and FM antenna. 18. A grounded power outlet is required for safe operation. 19. The grounded 3 prong power cable will be the mains disconnect and it should remain readily available. 20. To completely disconnect the unit from the AC mains, disconnect the power supply cord plug from the AC receptacle. 21. The main voltage for the AC mains is 120v AC (US Models) / 240v AC (Int’l models). Warning – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids are placed on the equipment. Carbon XA Amplifiers a IMPORTANT SAFETY INSTRUCTIONS b Carbon XA Amplifiers Carbon XA Amplifiers Carbon XA Amplifiers Overview Where more than one pair of speakers is required in Matrix Distributed Audio zones, the Carbon XA Amplifier (FIG. 1) provides the extra power needed to drive up to 4 additional speaker pairs per unit for a total of 12 additional speaker pairs or 24 channels per zone. Use Carbon XA Amplifiers in backyards, large rooms or other zones where additional speakers are needed. FIG. 1 Carbon XA Amplifiers - Front view (DAS-AMP4 shown) The DAS-AMP4 Carbon XA 4-Channel Amplifier is a 4-channel amp that supports an additional 2 speaker pairs per unit. The DAS-AMP8 Carbon XA 8-Channel Amplifier is an 8-channel amp that supports an additional 4 speaker pairs per unit. DAS-AMP4 To speaker pair (SWT) To speaker pair (SWT) To speaker pair (SWT) To speaker pair (SWT) To speaker pair (SWT) To speaker pair (SWT) DAS-AMP8 FIG. 2 Carbon XA Amplifiers (rear panels) Features .. High-quality sound - delivers 60 watts of high-quality sound per channel. .. Expandable - stack up to three Carbon XA Amplifiers units per zone to allow up to 12 speaker pairs (24 channels) in a single zone. .. Easy installation - SWT (Speaker Wire Technology) makes installation simple using four conductor speaker wire. .. Integrates with both the Delta Series and Mi Series controllers, as well as the C, C-DT and EL Series speakers. Carbon XA Amplifiers Carbon XA Amplifiers Product Specifications Carbon XA Product Specifications Models Available: DAS-AMP4 4-Channel Amplifier • US version (120V) - FG1102-01 • Int’l version (230V) - FG1102-03 DAS-AMP8 8-Channel Amplifier • US version (120V) - FG1102-02 • Int’l version (230V) - FG1102-04 Dimensions (HWD): • 3 1/16” x 17” x 13 1/2” (7.68cm x 43.18cm x 33.52cm) • RU: 2 Weight: 25.75 lbs (11.68 kg) Power: • Average usage: 250 W • Maximum: 750 W • High current Torroidal power supply Stereo Output: • Dual mono amplifier stage design • 60 W per channel (1 KHz continuous .006%@ 8 Ohms THD+N) • Each Carbon XA amplifier is capable of providing 480 watts @ 8 Ohms Configuration: • Modular Design - configurable in single pairs up to 4 stereo pairs (8 channels). • Stackable (up to 3 Carbon XA Amplifiers) Control Options: • Matrix keypad • C-Series speakers using SWT Front Panel Components: Status LED: Dual stage status LED: • Red in standby • Green when active Rear Panel Components: • Power Switch & Receptacle The master power switch will remain in the ON position normally. • Output 1-4: Euro-style connectors provide direct connection to speakers. • From Controller: SWT input port (connects to an Mi-Series Audio Controller) • To Keypad: SWT output port (connects to Matrix keypad or interface) Included Accessories: Power Cord Other AMX Equipment: DAS-MRMK Mi Series Rack ...