Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
It utilizes buffered outputs to provide signal integrity when distributing data and video to plasma displays, projectors and monitors. By using true, high-quality VGA cable, signal and picture quality can be extended over long distances. The AVB-DA-RGBHV-0102 also comes complete with an external 12V power supply. (front) SOLECIS AVB-DA-RGBHV-0102 ©-Î-® T ö O I—Video IN Video OUT 1-i FIG. 1 Solecis AVB-DA-RGBHV-0102 Power connector Video OUT 2 r* (rear) Common Application The AVB-DA-RGBHV-0102 is a perfect choice for a variety of presentation applications requiring up to two outputs. Product Specifications AVB-DA-RGBHV-0102 Specifications (Cont.) Power Input Voltage: 9-12VDC Power Consumption: 3W Heat Dissipation: 10.2 BTU/hr Dimensions (HWD): • 1.44” x 5.80” x 2.77” • 36.6mm x 147.3mm x 70.4mm Weight: 0.62 lbs. (0.28kg) Included Accessories: PS2.8 power supply (FG423-11) Certifications: • CE • FCC class B, part 15 • RoHS/WEEE compliant Safety Instructions Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment. Liquid Spills Do not set drinks on top of the unit or immerse the unit in liquid. Do Not Disassemble This device contains no user serviceable parts. All servicing must be performed by a qualified service technician. For Safety Reasons • Do not place the unit on an unstable surface. • Do not use near water or sources of heat. • Use only recommended attachments. • Use the type of power supply as specified. Unplug the power to the unit and refer servicing to qualified personnel under the following conditions: • If liquid has been spilled or the unit has been exposed to rain or water. • If it does not operate normally when the operating instructions are followed or if it exhibits a distinct change in performance indicating a need for service. • If the unit has been dropped or the cabinet damaged. Video Pin Connections FIG. 2 provides the pin layout for the HD-15 connectors: AVB-DA-RGBHV-0102 Specifications RGB Input (HD-15) Number: 1 Level: Analog Max Level: 1V p-p Impedance: 75 ohm Sync Input Type: Analog or TTL Impedance: 470 ohm RGB Video Bandwidth: 400MHz -3dB RGB Return Loss: -45dB@10MHz, -27dB@100MHz Sync Processing: TTL restore RGB Outputs (HD-15) Number: 2 Level: Analog Gain: Unity Impedance: 75 ohm Sync Output Level: TTL Impedance: 75 ohm FIG. 2 RGBHV connector The pin configuration for the HD-15 (vi< 1 - RED 2 - GREEN 3 - BLUE 4 - n/c 5 - n/c 6 - RED GROUND 7 - GREEN GROUND 8 - BLUE GROUND NOTE: Extended Display Identification o) connectors are as follows: 9 - n/c 10 - SYNC GROUND 11 - n/c 12 - n/c 13 - H SYNC 14 - V SYNC 15 - n/c Data (EDID) is passed via the RGB Input. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 4/11 ©2011 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical suppor...