Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
with studio camera head; 360VA or 210Watts max. with port. camera head Utility power 150VA or 150Watts max. on studio camera head; 80VA or 80Watts max. on port. camera head LDK 4521 HDTV TRIAX MODULES LDK 4521/10 TriaxHD Module with Fischer triax connector LDK 4521/20 TriaxHD Module with Tri-Lock triax connector LDK 4521/30 TriaxHD Module with ARD triax connector LDK 4521/40 TriaxHD Module with Lemo 4 triax connector LDK 4521/50 TriaxHD Module with Lemo BBC triax connector LDK 4521/60 TriaxHD Module with Lemo 3 triax connector LDK 4530 EXTERNAL VIDEO IN MODULES LDK 4530/10 External video input module External video in BNC 2x, 1.0Vp-p, 75 (loop-through) (CVBS or VBS) LDK 4531 VIDEO OUT MODULES LDK 4531/20 SDTV output HD module SDI out BNC 3x, 0.8Vp-p, 75 , SMPTE 259M, ITU-R, BT.601 Analog out BNC 3x, R, G, B or Y, Pr, Pb, or 3x CVBS (menu selection): -RGB out: 3x 0.7Vp-p (+/- 1%), 75 . -Y, Pr, Pb: 3x 0.7Vp-p (+/- 1%), 75 . -CVBS out: 3x 1.0Vp- p (+/- 1%), 75 . Frequency response 0.1 to 5.75MHz (+0.5dB/-1dB) K factor Less than 2% LDK 4540 AUDIO & INTERCOM MODULES LDK 4540/10 2 ch. audio & 2/4-wire intercom Audio out XLR- 3 2x, 0/+6dBu (+/-1.5dB, max. 18dBu, 600 , Gain Max. 70dB) Frequency response 40Hz to 15kHz, (+1/-3dB, 1kHz, -10dBu output level) Distortion Less than 0.5% (100Hz/ 1kHz, +6dBu out, 600 ) S/N ratio 58dB (unweighted RMS) Intercom in/out D-sub 15- pin, female (program in, production in/out, engineering in/out in: 0 or 6dBu (max. 6 or 12dBu), 9k, out: 0 or 6dBu (+/ -2dB, max 12dBu), 600. Frequency response 150Hz to 6kHz (1kHz, -10dBu output level) Distortion Less than 2% (1kHz, +12dBu level) LDK 4541 Engineering intercom module LDK 4541/10 XLR-5 (female) engineering intercom module LDK 4541/20 Tuchel 6- pin engineering intercom module LDK 4541/30 Tuchel 5- pin engineering intercom module LDK 4541/40 XLR-7 (female) engineering intercom module (6dBu, +/- 2dB, max 12dBu, 25-400 ) Frequency response 150Hz to 6kHz, +/- 3dB (0dB, 1kHz, 10dBu output level) S/N ratio 46dB (unweighted RMS) Phantom power +12Vdc (+/ -1V), menu selectable LDK 4560 MONITORING MODULES LDK 4560/20 Monitoring HD module (with WFM, PXM and analog HDTV out) PXM video out BNC 1x, 1.0Vp-p, 75 , SMPTE 274M or SMPTE 296M (depending on acquisition format); R, G, B or Y (menu selection) with HD tri-level SYNC WFM video out BNC 1x, 1.0Vp-p, 75 , SMPTE 274M or SMPTE 296M (depending on acquisition format); R, G, B or Y (menu selection) with HD tri-level sync. Analog HDTV out VGA-type D-connector, 15-pin, female, with R, G, B, H-sync and V-sync Frequency response 0.1 to 30MHz (+0.5dB/- 1dB) Installation User's Guide LDK 4502 - HDTV Camera Base Station 2-24 User's Guide LDK 4502 - HDTV Camera Base Station Installation Section 3 Operating Instructions This section describes the structure of the camera base station control system. This section explains how to control and program the menu system and how to set up the menu system to suit your personal preferences. The menu structure and the methods of function selection are also explained. The appendix shows the contents of the menu system. Contents Introduction......................................................................3-2 Set-up ..............................................................................3-4 Front panel ......................................................................3-3 Using the Menu System..................................................3-5 Operating Instructions User's Guide LDK 4502 - HDTV Camera Base Station Introduction The flexible design of the base station means that it can be integrated into a variety of configurations in studios or OB vans. To made full use of its extensive functionality it provides many facilities for setting it up. Once set up, operation is vitually transparent. We recommend that you spend time using the various controls and displays in order to fully discover the wide range of features. Read the instructions in this section carefully but also feel free to examine the various menus in detail. In this way you will learn quickly to intuitively use the system. Simple set-up The Rotary/Push button behind the left front cover can be used to control some basic set-up functions. It can also be used to navigate through the menu system. Menu System The menu system is used for setting up and configuring the base station. As there are a large number of functions and set-up options available, it may require some time for you to become familiar with them all. OCP menu control Although the Rotary/Push button can be used to navigate through the menu system, it is more convenient to use the OCP connected to the Base Station. (Refer to the OCP user guide to find out how to do this.) Viewing the menu The System Menu video signal is available on the Text output of the base station. The System Menu text can also be superimposed on the CVBS output if desired. User's Guide LDK 4502 - HDTV Camera Base Station Operating Instructions Prod Prog Cam +Floor ...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - LDK 4502 (3.13 mb)