Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
The 232-STSi features a new, versatile solution for auto-tuning broadcasts that allows the user to mix and match different TV standards. For example, a viewer in Germany (PAL B/G, A2 audio) can also save presets for Belgian broadcasts (PAL B/G, NICAM audio). Channel preset search, TV standard, add, and delete can be controlled from optional iC-RC remote or control system programming. An onboard character generator displays on-screen text for closed captioning, channel names, interactive menus, and system feedback. Switchable inputs for composite video and stereo audio are included for display of PC graphics, VCR, camera or other A/V sources. AV from inputs and off-air broadcast are output as composite video, S-Video and Stereo, Mono, or Dual audio. Up to nine tuners can be integrated from one RS-232 control port. Features • Tunes PAL CATV and off-air frequencies, storing up to 125 Channel Presets in memory • Features intelligent auto-tuning of TV frequencies, with the ability to save channel presets that include the frequency and TV Standard • Delivers balanced A2/NICAM Stereo audio with programmable volume levels, as well as Mono and Dual A/B audio • Outputs S-Video signal for improved image quality for monitors, large-screen displays and video projectors, employing adaptive comb and anti-aliasing filtering, as well as cross-color and cross-luminance reduction • Switches between tuner and composite AV inputs, outputs simultaneous composite and S-Video • Operates using one of several control pathways: - Full bi-directional RS-232 control and status feedback, AMX and Crestron modules available - PC control using free Tuner Helper software (great for saving tuner channels and setup information) - Front-panel programming options for tuning, RS-232 and operation setup - Optional IC-RC IR wireless remote, discrete IR and wired IR codes, as well as contact closure channel up/down • Provides front-panel control for A/V Mute, mode select, and channel up/down • Displays closed-captioning (LIne 22) and on-screen text channel names, interactive menus, and system feedback • Inserts blue screen video image when unit senses loss of video level • Updates firmware with easy-to-use S12 Flash software, available from CR website • Mounts in 19" rack with optional RK1 or RK2 kit for dual side-by-side installation 232-STSi Specifications 232-STSi Back Panel RCA Stereo Adapter Physical Size: 8.5" [216mm] wide x 1.75" [38mm] height (1RU) x 6.0" [153mm] deep Weight: 1.5 lbs [0.68kg] Enclosure: All aluminum with durable black powder coat paint Mounting: Rack mounting for one or two units side-by-side optional (RK1, RK2) Front Panel RS-232 LEDs: Yellow LEDs light when RS-232 data is transmitted (TX) or received (RX) Mute A/V: Mutes audio and video (blanks video) Mute LED: Red LED lights when A/V is muted Volume: Up and down buttons control volume or select modes for front-panel programming Channel: Up and down buttons select channel presets 1-126, 126 selects external AV input IR LED: Red LED lights when receiving IR data, internal IR sensor below or from external sensor Discrete codes available for power, TV and external AV Display: Red LED 3 digit, 7 segment LED display for channels and modes, Stereo LED shows Stereo and Dual operation Rear Panel Power In: 2.1mm coaxial jack (inside center conductor positive), 475 mA maximum 11.0 to 14.5 VDC, 12 VDC typical (may be unregulated) RS-232 Control: DB-9 male connector User selectable 300 to 19,200 baud (9600 default) baud, 8 data bits, no parity, 1 stop bit Employs standard ASCII strings from any terminal program, PC, or control system 2 momentary closure inputs - Channel Up (Pin 4), Down (Pin 9), GND (Pin 5) IR In: 3.5 mm stereo input for external IR sensor or wired IR (no carrier) GND: Grounding lug Antenna/Cable: IEC, female, 75 ohm impedance Video Input: RCA female, 75 ohm impedance Audio Inputs: 2 RCA female stereo unbalanced, 20K ohms impedance Maximum level +8dBu, (2V RMS), Reference: 0 dBu = .775 V RMS Video Output: RCA composite output, 1V p-p at 75 ohm impedance, S-Video Output: Mini DIN 4-pin, Y - 1V p-p at 75 ohms, C - 0.3 V p-p at 75 ohms (PAL only) Audio Outputs: 5-Pin captive screw terminal, stereo, 200 ohm balanced/100 ohm unbalanced impedance Selectable for A2/NICAM stereo, mono A, mono B and Dual A/B modes Stereo/Dual: Total Harmonic Distortion (THD): 0.6% maximum, 0.3% typical Response: 30Hz to 14KHz, Channel Separation: 40dB minimum, 45dB typical Mono: Total Harmonic Distortion (THD) 0.6%, 0.2% typical Response: 20Hz to 20KHz Level: +4 dBu (1.2V RMS) balanced, 0 dBu (.8V RMS) unbalanced, typical at max volume +11.5 dBu (2.9V RMS) balanced, +8 dBu (2V RMS) unbalanced peak max output Volume control: 0 to -62 dB and mute in 64 steps Tuner Channels: Up to 125 Channel Presets in non-volatile memory Frequency 48 to 863 MHz, 50 KHz fine tune resolution PAL: PAL B, G, H, D, K, and I SECAM: B, G, H, D, K, and L - No closed captioning, on-screen text or blue scr...