.If you are not going to use the unit for a long time, be sure to disconnect the unit from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. .The AC power cord (mains lead) must be changed only at a qualified service shop. On placement .Place the unit in a location with adequate ventilation to prevent heat buildup and prolong the life of the unit. .Do not place the unit near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. .Do not place anything on top of the cabinet that might cause malfunctions. .Use caution when placing the unit on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result. On operation Before connecting other equipment, be sure to turn off and unplug the unit. On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. 5GB Specifications Amplifier section Reference Power Output 23 W + 23 W (4 ohms, 1 kHz, THD 10%) Rated Power Output 20 W + 20 W (4 ohms, 1 kHz, THD 0.9%) Speaker impedance match 4 ohms - 16 ohms S/N ratio LINE IN: 100 dB (short-circuit input, 20 kHz LPF, A Network) USB IN: 100 dB (20 kHz LPF, A Network) Frequency response 10 Hz - 100 kHz (+0 dB, –3 dB) (4 ohms, LINE IN) Input section (digital) USB REAR (USB-B jack) USB 2.0 compatible Supported format PCM (Sampling frequency: 44.1 k/48 k/88.2 k/96 k/176.4 k/ 192 kHz, data bit length: 16/24/32 bits) DSD (2.8 M/5.6 MHz) USB FRONT (USB-A jack) USB 2.0 compatible Supported format PCM (Sampling frequency: 32 k/44.1 k/48 kHz, data bit length: 16 bits) COAXIAL jack Input impedance: 75 ohms Supported format PCM (Sampling frequency: 32 k/44.1 k/48 k/88.2 k/96 k/176.4 k/ 192 kHz, data bit length: 16/24 bits) OPTICAL jack Supported format PCM (Sampling frequency: 32 k/44.1 k/48 k/88.2 k/96 kHz, data bit length: 16/24 bits) 6GB Input section (analog) Input sensitivity: 500 mV Input impedance: 100 kilohms Output section LINE OUT Output voltage: 2 V Output impedance: 2.2 kilohms 2 Hz - 80 kHz (–3 dB) PHONES 17 mW + 17 mW (8 ohms, THD 1%) 55 mW + 55 mW (32 ohms, THD 1%) 170 mW + 170 mW (300 ohms, THD 1%) General and others Power requirements AC 220-240 V 50/60 Hz Power consumption On: 65 W During standby mode: 0.3 W Dimensions (approx.) (w/h/d) 225 mm . 74 mm . 262 mm including projecting parts and controls Mass (approx.) 4.0 kg Supplied accessories AC power cord (1) Remote control (RM-ANU182) (1) USB cable (1) Quick Start Guide (1) Reference Guide (this manual) (1) Design and specifications are subject to change without notice. .Standby power consumption: 0.3 W 77B FIGYELMEZTETES FIGYELMEZTETES n vagy beepitett fulkeben) elhelyezni es muko...

Dieses Handbuch ist für folgende Modelle:
- ()