Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Make sure that the speaker wires do not fall out when you pull them and that the speaker cord is inserted according to its polarity: + to + and – to –. To remove the speaker plug from the speaker cord, loosen the screws with the Allen screwdriver and remove the speaker plug from the cord. Notes • Before attaching the speaker plug to a cord, strip off 10 mm of its insulation, twist the bare wires, and then insert them completely into the speaker plug ( B). • Make sure that bare wires of other cords do not touch one another or other terminals ( C). Short-circuiting the speaker cord may damage the system. • Do not fasten the screws too tightly. It may damage the speaker plug. • Keep the Allen screwdriver away from children. Tip Use generic AWG #14 - AWG #24 speaker cords. Connecting the System Insert the speaker plug into your receiver until you hear a click ( D). To disconnect the cord, push the pin and pull out the cord. Note Make sure that all the components are off before c...