Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Service Menu The HD tuner is an advanced media device with the ability of communicating through an RF network to maintain updated firmware and control. The features outlined below are advanced functions designed for an integrated RF system. This menu area is used to set up parameters for servicing the tuner or performing service functions. Update Channel This feature is used for setting a channel to perform firmware updates. Using the numeric keys on the remote, enter the channel that has been identified by your system administrator for firmware updates. Allow Update Searching This YES / NO selection either allows or prohibits the display from searching for an update channel for firmware updates. Having this selected as YES will allow updates when the Update Channel needs to be changed for some reason. Start Firmware Update To manually initial a firmware update, press the Right arrow button on the remote from this menu line. NOTE: By selecting this item, the tuner will immediately begin the firmware update process and reboot when complete. Note: During a firmware update, the Display MUST NOT be unplugged or turned off. Doing so while firmware is being downloaded and upgraded on the device could damage the unit and make it unusable. If the firmware update was initiated by mistake, it will time out after 3 to 5 minutes. Restore Factory Settings This function allows the tuner to be reset to the factory settings. Changes, channel lineup programming and other setup customizations will be lost and the tuner will return to factory settings. Show Status This menu item will activate a status window showing important information about the display, tuner, firmware versions and other diagnostic data. USER MENU User menus are accessed using either the lodging remote provided in the hotel room, or the remote supplied with the display. These menus are available to users to enjoy the features of the tuner and display. Only a few control functions are available through the user menus. Captioning This feature allows the selection of OFF / ON and On When Muted, Using the arrow buttons highlight the desired setting and then press the Left Arrow button to save and exit the field. Digital Captioning Mode This allows the user to select the format of the CC signal for digital channels Analog Captioning Mode This allows the user to select the format of the CC signal for analog channels Sleep Timer The sleep timer function allows the user to set the TV to turn off automatically after a selected number of minutes. Secondary Audio Programming (SAP) This menu item allows the user the option of turning on SAP audio if available. Source If made user-accessible from the Setup Menu, the user will have the ability to select available inputs on the display for use of attached media devices. If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. Note: The available inputs will be based on the model of display and video expansion boards installed (if any). Picture Format If made user-accessible from the Setup Menu, the user will have the ability to adjust the aspect ratio of content presented on the display. If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. Note: On Plasma monitors, user access to Picture Format will be limited to prevent the potential for image retention. V-Chip Options If made user-accessible from the Setup Menu, the user will have the ability to set and control V- Chip settings to restrict content from being shown on the tuner. If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. For information on how this feature operates, please OPERATION General Operation The HD tuner is an advanced HDTV and NTSC TV tuner with features that support lodging systems and stand-alone operation. Lodging Mode The tuner will automatically function in a lodging mode when attached to a compatible PPV system. The tuner will communicate with lodging system, identify the system and the necessary communication protocols and immediately send commands to the display necessary to function with the attached PPV system. Stand Alone To control the tuner in stand-alone mode, the tuner must not be connected to PPV system. If the display is connected to a PPV system, first disconnect the RJ12 communication cable between the tuner and the PPV control box. (RJ12 is connected to CONTROL - PPV). In Stand Alone mode, the tuner will respond to the Sony remote and other compatible PPV system remotes. To access the User Menu in stand alone mode, press the MENU button on the remote. Note on LX2 remote The supplied remote controller for the Sony FWD-32LX2F and FWD- 40LX2F does not have a Channel Up or Channel Down buttons. To change channels on the tuner, you must use the UP Arrow or Down Arrow on this remote, or use any Sony TV remote (such as the Sony RM-EZ2) or universal remote supporting the Sony TV IR commands. Controlling the So...