Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(P.69) Separate the times for PROG. 1 and PROG. 2 by at least 1 minute to ensure that their operating times do not overlap. .. .. .. Setting the Time R P.69 1 Select “TIMER SET”. Press the [G] or [H] key. Select “PROG. 1” or “PROG. 2”. Press the [G] or [H] key. 2 3 Select “ON” or “OFF”. Press the [G] or [H] key. 4 Selecting “OFF” ends the procedure and restores the original display. .. Press the [ENTER] key. Press the [ENTER] key. Press the [ENTER] key. 1 Press the [MODE] key. Continued to next page 64 Setting the Timer R-K711 7 Specify the “ON” (start time) setting. 8 Specify the “OFF” (end time) setting. Press the [G] or [H] key. Set the “hour”. Press the [G] or [H] key. Set the “minute”. Press the [ENTER] key. Press the [ENTER] key. Select the day (or days) on which the Program Timer will run. Press the [G] or [H] key. The setting changes as shown below each time you press the key. 5 .. The timer runs every week. Select “EVERY WEEK” or “ONETIME”. Press the [G] or [H] key. 6 Press the [ENTER] key. Press the [ENTER] key. .. The specifi ed timer runs once only. .. The “hour” fl ashes. .. The “minute” fl ashes. Press the [ENTER] key. Press the [ENTER] key. .. The “hour” fl ashes. .. The “minute” fl ashes. If you selected “EVERYDAY”, “MON-FRI”, “TUE-SAT” or “SAT-SUN”, proceed to step 7. .. Press the [G] or [H] key. Set the “hour”. Press the [G] or [H] key. Set the “minute”. EVERYDAY SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY SAT-SUN TUE-SAT MON-FRI SATURDAY FRIDAY Setting the Timer 99 1010 1111 Select “PLAY” or “AI PLAY”. Press the [G] or [H] key. 11 • Playback is at the volume set in step 10. • Playback begins at the specified time and the volume gradually increases to the level set in step 10. Press the [ENTER] key. Set the volume. Press the [G] or [H] key. Press the [ENTER] key. • You cannot use the [VOLUME] key to set the volume. Select the input source. Press the [G] or [H] key. The input source changes as shown below each time you press the key. TUNER CD AUX TAPE D-IN Press the [ENTER] key. • If you select an input source other than “TUNER”, this completes the settings and “COMPLETE” is displayed briefly, after which the original display reappears. • If you select “TUNER”, use the [G] or [H] to select a preset number and then press the [ENTER] key. This completes the settings and “COMPLETE” is displayed briefly, after which the original display reappears. Continued to next page 65English Setting the Timer To cancel (off ) or reset (on) the timer When the system is turned on, press the [TIMER] key. .... Press the power [K] key to turn the power OFF. The [STANDBY/TIMER] indicator on the main unit lights orange. If the indicator lights red, set the clock to the correct time. .... 1212 The setting changes each time you press the [TIMER] key. lit lit unlit lit PROG. 1 set to on PROG. 2 set to on PROG. 1 and 2 set to on Timer off If there has been a power failure or the system was unplugged from the wall outlet for some time, the [STANDBY/TIMER] indicator lights red. In that case, set the time again. (P.69) .. To modify the program settings, redo the timer settings from the beginning. When the system is in Standby mode, you can confirm the timer setting (on or off ) for 5 seconds by pressing the [F] key. .... R-K71166 Use these settings to adjust the brightness of the display and to specify the settings for the main unit dial lighting and the level meter. Setting the Display Brightness (DIMMER) Display Settings Use these settings to adjust the brightness of the display and to specify the settings for the main unit dial lighting and the level meter. Setting the Display Brightness (DIMMER) Display Settings Use this procedure to adjust the display brightness. Adjust the brightness according to your preferences and the conditions in the room. 11 Press the [MODE] key. key. Press the [DIMMER] Press the [G/I] or [J/H] key to select “DIMMER SET”. Press the [ENTER] key. Press the [G/I] or [J/H] key to select the brightness. The setting changes as shown below each time you press the key. “DIMMER OFF”: Normal brightness “DIMMER 1”: Reduces the display brightness. “DIMMER 2”: Reduces the display brightness and turns off the dial lighting. “DIMMER 3”: Restores the normal display brightness and turns off the dial Turning the Level Meter ON/OFF Select “LEVEL METER”. Press the [G] or [H] key. 22 Press the [ENTER] key. The level meter flashes... lighting. Press the [MODE] key.11 Continued to next page 67English 67 68 Display Settings R-K711 Turning the Display Saver ON/OFF Select “ON” or “OFF”. Press the [G] or [H] key. Select “DISP. SAVER”. Press the [G] or [H] key. 2 Press the [ENTER] key. 3 Press the [ENTER] key. .. The display saver is active. If the system is not used at all for a set period, this function scrolls the display to prevent burn-in of the text on the display and uneven display brightness. When you are playing a CD, the display saver is activated if the system is not used at all for 10 minutes after the CD stop...