Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(With manual tuning, stereo broadcasts will be received in monaural.) 4 Use the MULTI CONTROL knob or keys to select the station. Frequency “ST.” lights up when a display broadcast is being received in stereo. FM MHz STEREO AUTO TUNED ST. “TUNED” is displayed when a station is received. Auto tuning Manual tuning : : The next station is tuned automatically. Turn the knob (or press the key) to select the desired station. Using the RDS DISP. (Display) key RDS DISP. Pressing the RDS DISP. key changes the contents of thedisplay. Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broadcast is received. If no PS data was sent, “NO PS” is displayed. Listening to radio broadcasts Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. BAND INPUT SELECTOR MEMORY AUTO/CINEMA EQ. 1 Use the INPUT SELECTOR knob to select the tuner. 2 Use the BAND key to set the broadcast band to “FM”. 3 Press and hold the MEMORY key for more than 2 seconds. FM STEREO AUTO TUNED ST.SW RLSP A RDS 2 RT (Radio Text) display: Text data accompanying the RDS broadcast scrolls across the display. “NO RT” or “RT----” is displayed if the current RDS station does not provide RT data. FM STEREO AUTO TUNED ST.SW RLSP A RDS Operations • After a few minutes, up to 40 RDS stations are preset in order from channel “01”. • Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 01~15 will be replaced by the RDS stations.) STEREOSW RLSP A STEREOSW RLSP A 3 Frequency display: Displays the frequency of the current station. FM STEREO AUTO TUNED ST.SW RLSP A RDS MHz Listening to radio broadcasts Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. “Presetting RDS stations (RDS AUTO MEMORY)”. . MULTI CONTROL MEMORY 2 Enter the number of the preset you want to receive(up to “40”). Press the numeric keys in the following order: For “15”, press.......... 0,5 For “20”, press.......... 0,0,) • If you make a mistake entering a two digit number, press the +10 key several times to return to the original display and start again. A RL FM SP SW MHz STEREO AUTO TUNED ST. Receiving preset stations in order (P.CALL) P.CALL 4/. TUNER 1 Press TUNER key to select the tuner as the source. 2 Use the P.CALL 4/ . keys to select the desiredstation. • Each time you press the key, another preset station is received in order. Pressing the P.CALL . key does the following: Pressing the P.CALL 4 key does the following: Holding down the . or 4 keys, lets you skip through the presets, receiving each at preset station 0.5 second intervals. Operations 1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station. Blinks for 5 seconds Lights for 5 seconds FM MHz STEREO AUTO TUNED ST. MEMO SW RLSP A Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again.) 3 Use the MULTI CONTROL knob or keys to select one of thestation presets (1 – 40). 4 Press the MEMORY key to accept the setting. • Repeat steps 1, 2, 3, and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. Receiving preset stations Numeric keys TUNER 1 Press TUNER key to select the tuner as the source. Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. PTY MULTI CONTROL TUNING 1 / . Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. • Tune to an RDS station. 1 Press the PTY key to activate the PTY search mode. SP RDS A RL STEREO PTY SW When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, “NONE” is displayed. 2 While the “PTY” indicator is lit, use the MULTI CONTROL or TUNING 1 / . keys to select the program type ofyour choice. Program type table Listening to radio broadcasts 3 Press the PTY key to start searching. EXAMPLE: Searching for a Rock Music broadcast. Display while searching. Blinks STEREOSW RLSP A PTYRDS FM Program type name display Display when a station is received. Goes out STEREOSW RLSP...