Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Kenwood Dateigröße: 1.64 mb Dateiname: Unterrichtssprache:

• The adjustment item is displayed for approximately 8 seconds. Once-touch low frequency emphasis (BASS BOOST) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. Press the BASS BOOST key. • Press the key once to select the maximum (+10) low frequency emphasis setting. • This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. Switching back to the previous setting Press the BASS BOOST key again. Adjusting the LOUDNESS mode You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the LOUDNESS setting ON. To cancel Press the LOUDNESS key again so that the “LOUDNESS” indicator goes off. 22EN Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. MUTE L R ASW Blinks To cancel Press the MUTE key again so that the “MUTE” indicator goes off. • MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing VOLUME +/– keys. ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode. Press the ACTIVE EQ key for the following selections; 1 ACTIVE EQ MUSIC : Effective when listening to music. (The ACTIVE EQ indicator lights up.) 2 ACTIVE EQ CINEMA : Effective when watching a movie. (The ACTIVE EQ indicator lights up.) 3 ACTIVE EQ TV : Effective when watching TV. (The ACTIVE EQ indicator lights up.) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ indicator goes off.) • “ACTIVE EQ” will scroll from right to left. • When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ (MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON automatically. • ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback. SPEAKER EQ mode SPEAKER EQ’s function will automatically detect the various features of each speaker and effectively creates a stereoscopic sound effect. Press the SPEAKER EQ key to switch the following setting; 1 SPEAKER EQ SMALL : To select a small size speaker. (The SPEAKER EQ indicator lights up.) 2 SPEAKER EQ NORMAL : To select an average size speaker. (The SPEAKER EQ indicator lights up.) 3 SPEAKER EQ LARGE : To select a large size speaker. (The SPEAKER EQ indicator lights up.) 4 SPEAKER EQ OFF : The SPEAKER EQ function is turned OFF. (The SPEAKER EQ indicator goes off.) • “SPEAKER EQ” will scroll from right to left. • SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON. • SPEAKER EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback. Listening with headphones 1 Press the A and B Speaker keys so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. SL S SB SR SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODEA B CLIP AUTO DETECT LFE • If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES 3 Use the VOLUME CONTROL knob or VOLUME +/– keys to adjust the volume. Recording Recording audio (analog sources) MD/TAPE Recording a music source 1 Use the Input Selector keys to select the source (other than “MD/ TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the Input Selector keys to select the video source (other than “VIDEO 1”) you want to record. 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. • Recording may not be normal for some video software. This is due to the copy guard condition. ‚ Recording audio (digital sources) Switch on the REC MODE to record a digital input source. Usually use the AUTO REC MODE to record audio input sources. When the digital mode changes during recording in the AUTO REC MODE, the audio input source may be interrupted momentarily. Recording music in AUTO REC or MANUAL REC mode DIMMER Input Selector 1 Use the Input Selector keys to select the source (CD/DVD, DVD/6CH, VIDEO 2) you want to record. 2 Set the MD or TAPE recorder to record. 3 Press and hold the DIMMER key for more than 2 seconds to select the AUTO REC or MANUAL REC mode. 1 REC MODE off : The digital input record mode is switched off. 2 AUTO REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 MANUAL REC mode : The input signal type at the moment this mode is selected is held throughout this mode. For AUTO REC mode : L S SB SL SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kH...

Herunterladen

Geben Sie zwei Ziffern: