Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kenwood Dateigröße: 553.27 kb Dateiname: Unterrichtssprache:

When using more than one CD player (etc.) only the one connected to the specified jacks may be connected for system control. • Some CD players and cassette decks are not compatible with the [SL16] system control mode. Be sure to use the [XS8] system control mode when making system connections with equipment that is not [SL16] compatible. • Some MD players are not system control compatible. You cannot make system control connections to this kind of equipment. Notes 1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please do not connect any system control cords. Even without system control cords, normal operations can be carried out without effecting performance. 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals. Do not connect a system control cord to a cassette deck connected to the MONITOR jacks. SYSTEM CONTROL OPERATIONS Remote Control Lets you operate this unit with the system remote supplied with the receiver. Automatic Operation (except [XR] equipment) When you start playback from a source component, the input selector on this unit switches to that component automatically. Synchronized Recording (except [XR] equipment) Lets you synchronize recording with the start of playback when recording from CD, MD or analog discs. SWITCHING FROM [SL16] TO [XS8] • This operation will not effect items stored in the memory. • After switching the system control mode, turn the power off and unplug the power cord from the wall outlet, then plug it back. For [SL16] For [XS8] You can easily change the system control mode by adjusting the position of the SYSTEM CONTROL switch on the rear panel. Do this operation after completing all connections. SL16 (XS8) • Once you finish making the system connections, be sure to register the appropriate setup code for each component. RC3 • If you own remote controllable KENWOOD audio components that are not compatible with system control (or cannot be combined with your other system control components), registering the setup code enables you to control those components using the remote control supplied with this unit (without connecting system control cords). To register setup codes for your remote controllable KENWOOD audio components, see "Registering setup codes for other components". RC3 Registering setup codes for KENWOOD audio components(RC-R0507 only) Setting up the system KRF-V7010/V6010/V5010 (En/T) Connecting the speakers 1 Strip coating. 2 Loosen. Preparations 1Strip coating. 2Push lever. 3Insert cord. 4Return lever. 3 Insert. 4 Secure. • Never short circuit the + and – speaker cords. Front Speakers A • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly. SURROUND SPEAKERS FRONT SPEAKERS LR + +-- + +-- LR B CENTER SPEAKERFRONT SPEAKERS ++ -- R L C A SUB WOOFER SURROUND PRE OUT CENTER L R CENTER SPEAKER FRONT SPEAKERS CLR + - Right LeftRight Use the FRONT SPEAKERS B terminals if you want to connect a second front speaker system. (KRF-V5010 is not equipped with SPEAKERS B terminal.) Left Center Speaker Surround Speakers Powered subwoofer The KRF-V6010 and KRF-V5010 are equipped with one- touch speaker termi- nals. They are arranged in the same manner as the speaker terminals of the KRF-V7010. Refer to the instructions on making connections to the KRF-V7010 when making connections to the KRF-V6010 or KRF-V5010. KRF-V7010 Except for KRF-V7010 (Be sure to connect both surround speakers) Speaker impedance After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver. PRE OUT connections This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below. SUB WOOFER SURROUND PRE OUT CENTER L R Power amplifier Power amplifier Surround Speakers Powered Subwoofer Center Speaker • The KRF-V5010 is equipped with a SUBWOOFER terminal only. • Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. • To use the PRE OUT jacks, press the SPEAKERS A key to the on position (the SPEAKERS key in the case of the KRF-V5010). Setting up the system KRF-V7010/V6010/V5010 (En/T) Preparing the remote control (RC-R0507) Preparations Speaker placement Subwoofer Front speakers : Place to the front left and right of the listening position. Front speakers are requ...

Herunterladen

Geben Sie zwei Ziffern: