Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Kenwood, modell KRF-A4030

Hersteller: Kenwood
Dateigröße: 353.13 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


PS (Program Service name) Display Automatically displays the station name transmitted by the RDS station. RDS Auto Memory function $ Automatically selects and stores up to 30 RDS stations in the preset memory. If fewer than 30 RDS stations have been stored in the preset memory, regular FM stations will be stored in the remaining places. Operations Radio Text function Displays the radio text data transmitted by some RDS stations when you press the DISPLAY key. There is no display if no text data was transmitted. TI volume & If you preset the volume level, you can listen to the information of your choice at that volume level automatically. After the information has been received, the volume returns to the previous level. The ”RDS“ indicator lights up when an RDS broadcast (signal) is received. A B TP STEREO EON FM TUNED BBC 1FM AUTO SP. Note: Some functions and function names may differ for certain countries and areas. Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in “Presetting RDS stations (RDS AUTO MEMORY)”. $ Listening to radio broadcasts 14 Using the DISPLAY key Pressing the DISPLAY key changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broadcast is received, If no PS data was sent, “NO PS” is displayed. A B TP STEREO EON FM TUNED BBC 1FM AUTO SP. 2 RT (Radio Text) display: Text data accompanying the RDS broadcast scrolls across the display. “NO RT” or “RT----” is displayed if the current RDS station does not provide RT data. A B TP STEREO EON FM TUNED ABCDEFGH AUTO SP. Operations 3 Frequency display: Displays the frequency of the current station. A B TP STEREO EON FM TUNED . MHz SP. -- 1))4)AUTO Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you hold down the DISPLAY key of the main unit for more than 2 seconds, the display brightness changes among the three available settings. Select the brightness level you find most pleasing. The same function as above is also available by pressing the DIMMER key of the remote control unit. Presetting RDS stations (RDS AUTO MEMORY) (Main unit only) This function automatically stores up to 30 stations including the RDS stations and ordinary FM stations in the preset memory. In order to use the EON and PTY functions, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. 1Use the INPUT SELECTOR to select the tuner. 2Use the BAND key to set the broadcast band to “FM”. 3Press and hold the MEMORY key for more than 2 seconds. SP. A B FM AUTO j SP. A B FM MEMORY • After a few minutes, up to 30 RDS stations are preset in order from channel “01”. • Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS stations, the stations currently preset at numbers 01~15 are replaced by the RDS stations.) • The RDS AUTO MEMORY may take a few minutes to preset stations. SP. TAPE1 A B SP. TAPE1 A B SP. TAPE1 A B Listening to radio broadcasts Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number ”01“. Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. “Presetting RDS stations (RDS AUTO MEMORY)”.$ 1Tune to the station you want to store. 2Press the MEMORY key while receiving the station. Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). • When storing radio stations manually, it may take a few seconds before the “MEMO” indicator appears in the display after pressing the MEMORY key depending on receiving conditions. Blinks for 5 seconds Lights for 5 seconds STEREO TUNED AUTO SP. 01 89)). MHz A B FM MEMO 3Use the MULTI CONTROL to select one of the station presets (1 – 30). 4Press the MEMORY key to accept the setting. • Repeat steps 1, 2, 3 and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. Receiving preset stations 1Use the input selector (INPUT SELECTOR) to select the tuner. 2Using the remote control unit, enter the number of the preset you want to receive (up to ”30“). Press the numeric keys in the following order: For ”15“, press .......... 0,5 For ”20“, press .......... 0,0,) • If you make a mistake entering a two digit number, press the 0 key several times to return to the original display and start again. A B STEREO SP. TUNED FM . MHz 15 9)))AUTO Receiving preset stations in order(P.CALL) 1Use the input selector (INP...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien