Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
• The sound gets quieter at -10dB and louder at +10dB. 1 2 3 To exit setup mode • Press SETUP/MENU button once time. “SETUP OFF” appears on the display and test tone stops. 37 GB 36 • F.L (front left) : -10 ~ +10dB • CEN (centre) : -10 ~ +10dB • F.R (front right) : -10 ~ +10dB • S.R (surround right) : -10 ~ +10dB • S.B (surround back) : -10 ~ +10dB • S.L (surround left) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB To exit setup mode • Wait for about 5 seconds or press SETUP button. “SETUP OFF” appears on the display and exits Setup Menu. Press SETUP button. • “SETUP MODE” appears on the display and goes into Setup Mode. Press FUNCTION button to select the “LEVEL SETUP”. Press SURROUND button. • Each time you press this button, F.L .CEN .F.R .S.R . S.B .S.L . S.W will be selected in turn. Press SELECT( ) button to set the speaker level you want. • You can adjust it from -10 to +10dB by 1 step. • The sound gets smaller at -10dB and louder at +10dB. Setting Speaker Level MAIN UNIT 1 2 4 3 , OPERATION Setting speaker level You can set the balance and level of speakers. v Press SETUP/MENU button, and then press ENTER button. • “SETUP MODE” appears on the display and goes into Setup Mode. Press button to select the “LEVEL SETUP”, and then press ENTER button. Press button to select the speaker you want. • Each time you press button, F.L .CEN .F.R .S.R .S.B .S.L . S.W will be selected in turn. Press …† button to set the speaker mode. • You can adjust it from -10 to +10dB by 1 step. • The sound gets smaller at -10dB and louder at +10dB. 1 2 3 4 REMOTE CONTROL To exit setup mode • Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited. 1 Press SPK LEVEL button to select the speaker you want. • Each time you press this button, F.L .CEN .F.R .S.R .S.B . S.L . S.W .SPK LVL OFF will be selected in turn. 2 Press …† button to set the speaker level you want. • You can adjust it from -10 to +10dB by 1 step. • The sound gets quieter at -10dB and louder at +10dB. Using the SPK LEVEL button 39 GB 38 • MUSIC : Provides 6.1 channel surround sound to digital, analogue or existing stereo sources such as CD, TAPE, FM, TV and stereo VCR. • CINEMA : Adds realism to the movie soundtrack. • MATRIX : You will hear 6.1 channel surround sound. •GAME : Enhances the excitement of the game's sound. • PL : You will experience a surround effect with just the front left and right speakers. Press SURROUND button to select “DPLIIx” mode. • Each time you press this button, DPLIIx .NEO:6 .SFE .STEREO will be selected in turn. Press SELECT( ) button. • Each time you press SELECT ( ) button, CINEMA .MATRIX . GAME . PL .MUSIC will be selected in turn. • Each time you press SELECT ( ) button, MUSIC .PL . GAME . MATRIX .CINEMA will be selected in turn. Dolby Pro Logic llx mode To exit setup mode • Wait for about 5 seconds. MAIN UNIT 1 2 , OPERATION Dolby Pro Logic llx mode This mode provides 6.1 channel sound from 2 channel sources Press MODE button. • Each time you press this button, CINEMA . MATRIX . GAME . PL . MUSIC will be selected in turn. To exit setup mode • Wait for about 5 seconds. REMOTE CONTROL • You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS. • Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. • Sound will not be output from surround back speaker if PCM audio signal is mono. 41 GB 40 OPERATION • C-WIDTH : This sets the width of the centre image. The higher the setting, the less sound comes from the centre speaker. • DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround. • PANORAMA : This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. To exit setup mode • Wait for about 5 seconds or press SETUP button. “SETUP OFF” appears on the display and Setup Mode is exited. Press SETUP button. • “SETUP MODE” appears on the display and goes into Setup Mode. Press FUNCTION button to select the “DPLIIx MODE”. Press SURROUND button. • Each time you press this button, C-WIDTH . DIMENSION . PANORAMA will be selected in turn. Press SELECT( ) button to set the Dolby Pro Logic llx effect you want. Dolby Pro Logic llx effect MAIN UNIT 1 2 4 3 , Setting Dolby Pro Logic llx effect This function works only in Dolby PRO LOGIC IIx MUSIC Mode. Press SETUP/MENU button, and then press ENTER button. • “SETUP MODE” appears on the display and goes into Setup Mode. Press button to select the “ MODE”, and then press ENTER button. Press button. • Each time you press this button, C-WIDTH .DIMENSION . PANORAMA will be selected in turn. Press …† button to set the Dolby Pro Logic llx effect you want. To exit setup mode • Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited. REMOTE CONTROL 1 2 3 4 1 Press MODE button to select ‘MUSIC’ Mode. 2 Press EFFECT button. • ...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - AV-R710 (20.24 mb)