Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Receiver und Verstärker - STR-DE875 (1.55 mb)
Receiver und Verstärker - STR-DE875 (1.57 mb)
Receiver und Verstärker - STR-DE875 (7.56 mb)
Anleitung Zusammenfassung
The midpoint designates a neutral wall (made of wood). Reverberation (REVB S_I_L) Initial setting : Midpoint Lets you control the spacing of the early reflections to simulate a sonically larger (L) or smaller (S) room. The midpoint designates a standard room with no adjustment. Front reverberation (FRONT REVERB) Initial setting : STD This parameter can be used when “DIGITAL CONCERT HALL A, B” is selected. This parameter lets you adjust the amount of reverberations to add to the front signals according to the original reverberations in the source. • To increase front reverberations, select “WET”. • To decrease front reverberations, select ”DRY”. Screen depth (SCEEN DEPTH) Initial setting : MID In a movie theater, sound seems to come from inside the image reflected on the movie screen. This parameter allows you to create the same sensation in your listening room by shifting the sound of the front speakers “into” the screen. “DEEP” provides the greatest amount of screen depth. Virtual speaker (VIR. SPEAKERS) Initial setting : ON Allows you turn the virtual speakers created by the CINEMA STUDIO EX A, B, C and SEMI CINEMA STUDIO EX A, B, C sound fields off or on. 34 Adjusting the level parameters The LEVEL menu contains parameters that let you adjust the balance and speaker volumes of each speaker. The settings available in this menu are applied to all sound fields. 1 Start playing a program source encoded with multi channel surround sound. 2 Press LEVEL. The button lights up and the first parameter is displayed. 3 Press the cursor buttons ( or ) to select the parameter you want to adjust. 4 Turn the jog dial to select the setting you want. The setting is stored automatically. Front balance (FRONT L_I_R) Initial setting : Center Lets you adjust the balance between the front left and right speakers. Surround balance (SURROUND L_I_R) Initial setting : Center Lets you adjust the balance between the surround left and right speakers. Center level (CENTER LEVEL XXX dB) Initial setting : 0 dB Lets you adjust the level of the center speaker. Surround level (SURROUND LEVEL XXX dB) Initial setting : 0 dB Lets you adjust level of the surround (left and right) speakers. Surround back level (SURR BACK LEVEL XXX dB) Initial setting : 0 dB Lets you adjust the level of the surround back speaker. Sub woofer level (S. WOOFER LEVEL XXX dB) Initial setting : 0 dB Lets you adjust the level of the sub woofer. Low Frequency Effect (LFE MIX XXX dB) Initial setting : 0 dB Lets you attenuate the level of the LFE (Low Frequency Effect) channel output from the sub woofer without affecting the level of the bass frequencies sent to the sub woofer from the front, center or surround channels via the Dolby Digital or DTS bass redirection circuitry. • For LFE mix level, “0 dB” outputs the full LFE signal at the mix level determined by the recording engineer. • To mute the sound of the LFE channel from the sub woofer, select “OFF”. However, the low frequency sounds of the front, center, or surround speakers are output from the sub woofer according to the settings made for each speaker in the speaker setup (page 1721). Dynamic range compressor (D. RANGE COMP.) Initial setting : OFF Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the “MAX” setting. • To reproduce the sound track with no compression, select “OFF”. • To reproduce the sound track with the dynamic range intended by the recording engineer, select “STD”. • To compress the dynamic range in small steps to achieve the sound you desire, select “0.1”–”0.9”. • To reproduce a dramatic compression of the dynamic range, select “MAX”. Note Dynamic range compression is possible with Dolby Digital sources only. Enjoying Surround Sound 35 Customizing Sound Fields Enjoying Surround Sound Adjusting the equalizer The EQ menu lets you adjust the equalization of the front, center, surround, and surround back apeakers. The settings are stored individually for each sound field. 1 Start playing a program source encoded with multi channel surround sound. 2 Press EQ. The button lights up and the first parameter is displayed. 3 Press the cursor buttons ( or ) to select the parameter (gain (dB), bandwidth, frequendy (Hz)) you want to adjust. 4 Turn the jog dial to select the setting you want. The setting is entered automatically. Level (dB) Frequency (Hz) To turn on/ off the equalizer Press EQUALIZER. The EQ indicator in the display lights up when the equalizer is turned on. When you adjust the equalizer using the EQ parameters, the settings are stored separately for each sound field and can be reproduced whenever you turn on the equalizer. Front speaker bass adjustment (Level/ Frequency) Lets you adjust the gain and frequency of bass. Front speaker midrange adjustment (Level/ Frequency) Lets you adjust the gain and frequency of midrange. Front speaker treble adjustment (Level/ Frequency) Lets you adjust the...