Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Receiver und Verstärker - STR-DE475 (538.83 kb)
Receiver und Verstärker - STR-DE475 (2.19 mb)
Receiver und Verstärker - STR-DE475 (2.1 mb)
Anleitung Zusammenfassung
After tuning in any AM station, turn off the receiver. Hold down the TUNING + button and press the ?/1 button. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs Video: 1 Vp-p 75 ohms Outputs Video: 1 Vp-p 75 ohms General System Tuner section: PLL quartz-locked digital synthesizer system Preamplifier section: Low-noise NF type equalizer Power amplifier section: Pure-complementary SEPP Power requirements Models of area code U, CA 120 V AC, 60 Hz Models of area code AU 240 V AC, 50 Hz Models of area code E2/E3 120/220/240 V AC, 50/60 Hz Models of area code TW 110 V AC, 50/60 Hz Power consumption Models of area code U 185 W In Standby Condition: 1 W Models of area code CA 280 VA In Standby Condition: 1 W Models of area code E2/E3, AU 175 W In Standby Condition: 1 W Models of area code TW 340 W In Standby Condition: 1 W Dimensions 430 . 145 . 298 mm (17 . 5 6/8 . 116/8 in.) including projecting parts and controls Mass (Approx.) 7.2 kg (15 lb 14 oz) Supplied accessories See page 4. For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice. Additional Information 45 Additional Information Glossary Surround sound Sound that consists of three elements: direct sound, early reflected sound (early reflections) and reverberative sound (reverberation). The acoustics of the surrounding space affect the way these three sound elements are heard. Surround sound combines these sound elements in such a way that you actually can sense the size of the venue, as well as its type. • Types of sound • Transition of sound from surround speakers Reverberation Direct sound Early reflections Direct sound Level Time Early reflections Reverberation Early reflection time Dolby Pro Logic Surround As one method of decoding Dolby Surround, Dolby Pro Logic Surround produces four channels from two- channel sound. Compared with the former Dolby Surround system, Dolby Pro Logic Surround reproduces left-to-right panning more naturally and localizes sounds more precisely. To take full advantage of Dolby Pro Logic Surround, you should have one pair of surround speakers and a center speaker. The surround speakers output monaural sound. Dolby Digital This sound format for movie theaters is more advanced than Dolby Pro Logic Surround. In this format, the surround speakers output stereo sound with an expanded frequency range and a sub woofer channel for deep bass is independently provided. This format is also called “5.1” because the sub woofer channel is counted as 0.1 channel (since it functions only when a deep bass effect is needed). All six channels in this format are recorded separately to realize superior channel separation. Furthermore, since all the signals are processed digitally, less signal degradation occurs. Digital Cinema Sound This is the generic name of the surround sound produced by digital signal processing technology developed by Sony. Unlike previous surround sound fields mainly directed at the reproduction of music, Digital Cinema Sound is designed specifically for the enjoyment of movies. 46 Settings Using SURR, LEVEL, and SET UP buttons You can make various settings using the LEVEL, SURR, SET UP, MENU and MENU +/– buttons. The table below shows each of the settings that these buttons can make. Press and light Press MENU I or i to select Press MENU + or – to select See page SURR button EFFECT LEVEL depends on sound mode (in 16 steps) 30 WALL TYPE between –8 to +8 (in 1 increment steps) REVERBERATION TIME –8 to +8 (in 1 increment steps) LEVEL button FRONT BALANCE between –8 to +8 (in 1 increment steps) 31 SURR BALANCE between –8 to +8 (in 1 increment steps) SURR LEVEL between –10 dB to +6 dB (in 1 dB steps) CENTER LEVEL between –10 dB to +6 dB (in 1 dB steps) SUB WOOFER LEVEL between –10 dB to +6 dB (in 1 dB steps) LFE MIX LEVEL OFF, or –20 dB to 0 dB (in 1 dB steps) DYNAMIC RANGE COMP OFF, 0.1 to 0.9 (in 0.1 dB steps), STD, or MAX *SET UP (FRONT) LARGE or SMALL 15 L R C (CENTER) LARGE, SMALL, or NO SL SR (SURR) LARGE, SMALL, or NO SL SR (SURR) PL. XXX PL. SIDE or PL. BEHD. SL SR (SURR) HGT. XXX HGT. LOW or HGT. HIGH S. W. (SUB WOOFER) S.W. YES or S.W. NO L R (FRONT) XX.X ft. (m) between 3 feet (1.0 meters) and 40 feet (12.0 meters) (in 1 foot (0.1 meter) steps) C (CENTER) XX.X ft. (m) between FRONT and 5 feet (1.5 meters) (in 1 foot (0.1 meter) steps) SL SR (SURR) XX.X ft. (m) between FRONT and 15 feet (4.5 meters) (in 1 foot (0.1 meter) steps) DIM.RANGE NARROW or WIDE 41 MULTI CH IN VISUAL XXX V-TV/SAT, V-DVD/LD, V-VIDEO * When you press the SET UP button, you can select NORM. SP. (for normal speakers) or MICRO SP. (for Micro Satellite speakers). (page 15) Additional Information 47 Remote Button Description You can use the remote to operate the components in your system. The tables below show the settings of each button. Additional Information Remo...