Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Receiver und Verstärker - STR-DE825 (539.16 kb)
Receiver und Verstärker - STR-DE825 (553.79 kb)
Anleitung Zusammenfassung
Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. • One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. • AC power cord must be changed only at the qualified service shop. On placement • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions. On operation Before connecting other components, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. 2 About This Manual Table of contents The instructions in this manual are for model STR-DE825. Check your model number by looking at the upper right corner of the front panel. Conventions • The instructions in this manual describe the controls on the receiver. You can also use the controls on the supplied remote if they have the same or similar names as those on the receiver. For details on the use of your remote, refer to the separate operating instructions supplied with the remote. • The following icon is used in this manual: Z Indicates hints and tips for making the task easier. This receiver incorporates the Dolby* Pro Logic Surround system. • Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY, the double-D symbol a, "PRO LOGIC,” and Dolby Digital (AC-3) are trademarks of Dolby Laboratories Licensing Corporation. Hooking Up the Components 4 Unpacking 4 Antenna Hookups 5 Audio Component Hookups 6 Video Component Hookups 7 Digital Component Hookups 8 Other Hookups 10 Hooking Up and Setting Up the Speaker System 11 Speaker System Hookup 12 Multi-Channel Surround Setup 13 Before You Use Your Receiver 18 Location of Parts and Basic Amplifier Operations 20 Front Panel Parts Description 20 Enjoying Surround Sound 24 Selecting a Sound Field 25 Understanding the Multi-Channel Surround Displays 29 Customizing Sound Fields 31 Receiving Broadcasts 35 Direct Tuning 36 Automatic Tuning 37 Preset Tuning 37 Other Operations 39 Indexing Preset Stations and Program Sources 40 Recording 40 Using the Sleep Timer 41 Adjustments Using the SET UP Button 42 Additional Information 43 Troubleshooting 43 Specifications 45 Glossary 47 Tables of Settings Using the CURSOR MODE and SET UP buttons 48 Index 50 Demonstration Mode The demonstration will activate the first time you turn on the power. When the demonstration starts, the following message appears in the display twice: "Now Demonstration Mode!! If you finish demonstration, please press POWER KEY while this message appears in the display. Thank you!!” To cancel the demonstration Press 1/U to turn the receiver off during the previous message. The next time you turn the receiver on, the demonstration will not appear. To view the demonstration Hold down SET UP and press 1/U to turn on the power. Note Running the demonstration will clear the receiver's memory. For details on what will be cleared, see "Clearing the receiver's memory” on page 18. 3 Hooking Up the Components This chapter describes how to connect various audio and video components to the receiver. Be sure to read the sections for the components you have before you actually connect them to the receiver. Unpacking Check that you received the following items with the remote: • FM wire antenna (1) • AM loop antenna (1) • Remote commander RM-LJ301 (remote) (1) • LR6 (size-AA) alkaline batteries (3) Inserting batteries into the remote Insert three size-AA (LR6) alkaline batteries with the + and - properly oriented in the battery compartment. When using the remote,...