Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Connects to the supplied ECM-AC2 optimizer microphone for the Auto Calibration function (page 24). Press to store a station (page 49). H Display I AMP MENU JENTER The current status of the selected component or a list of selectable items appears here (page 6). Press to display the menu of the receiver. Press to store a station or enter the selection when selecting the settings (page 27, 32, 51, 54). |4| PRESET TUNING Press to select a preset +/— station (page 50). K 2CH Press to select 2CH STEREO mode (page 46). E DISPLAY F DIMMER G Remote sensor Press to select information displayed on the display (page 52, 54). Press to adjust the brightness of the display (page 41). Receives signals from remote commander. L a.f.d. M MOVIE, MUSIC 0 MASTER VOLUME Press to select A.F.D. mode (page 42). Press to select sound fields (MOVIE, MUSIC) (page 43). Turn to adjust the volume level of all speakers at the same time (page 28, 29, 30, 31). 4GB Name Function O INPUT MODE Press to select the input mode when the same components are connected to both digital and analog jacks (page 53). P /A/V After pressing AMP MENU (I), press < or > and A or V to select the settings. Q Input buttons Press one of the button to select the component you want to use. R TUNING +/- Press to scan a station (page 47, 50). S FM MODE Press to select FM monaural or stereo reception. T PHONES jack Connects to a headphone (page 59). 5GB Getting Started About the indicators on the display 12 3 LFE SP □0S îsl| s is ; DIGITAL ;PRO LOGIC II DTS H qs EH T RDS I MEMORY STEREO MONO 9 ! I—i J Name Function Name A sw Lights up when sub woofer selection is set to “YES” (page 34) and the audio signal is output from the SUB WOOFER jack. E ;pro LOGIC (II) B lfe Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C sp Lights up when the receiver is turned on. This indicator does not light up if a headphone is connected to the PHONES jack. D ;digital Lights up when Dolby Digital signals are input. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 53). F DTS Function H Preset station indicators Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated. However, both indicators do not light up if both the center and surround speakers are set to “NO” and “A.F.D. AUTO”, “DOLBY PL”, “PLII MV”, or “PLII MS” is selected. Note Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals. Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 53). Lights up when a memory function, such as Preset Memory (page 50), etc., is activated. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 49. 6GB Name Function I Tuner indicators Lights up when using the receiver to tune in radio stations (page 47), etc. Note “RDS” appears for models of area code CEL, CEK only. J D.RANGE Lights up when dynamic range compression is activated (page 33). K COAX Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to “COAX IN” (page 53). L opt Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to “OPT IN” (page 53). MSLEEP Lights up when the sleep timer is activated (page 55). N Playback The letters (L, C, R, etc.) channel indicate the channels being indicators played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). L Front Left R Front Right C Center (monaural) SL Surround Left SR Surround Right S Surround (monaural or the surround components obtained by Pro Logic processing) Example: Recording format (Front/ Surround): 3/2.1 Output channel: When surround speaker is set to “NO” (page 34) Sound Field: A.F.D. AUTO [swI BEE SL SR 7 GB Getting Started Rear panel 12 3 A DIGITAL INPUT section □ OPTICAL IN jack Connects to a DVD player, etc. The COAXIAL jack provides a better COAXIAL IN quality of loud jack sound (page 18, 20). B AUDIO INPUT section AUDIO IN/ White (L) OUT jack Red (R) Connects to an MD deck or CD player, etc. (page 15). C ANTENNA section FM Connects to the © ANTENNA FM wire antenna supplied with this receiver (page 22). AM Connects to the UM ANTENNA AM loop antenna QQ supplied with this receiver (page 22). D VIDEO/AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) ...