Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Extron electronic Dateigröße: 4.08 mb Dateiname: Unterrichtssprache:

Increase the active pixels. Decrease the active pixels. Show the active pixels. Adjust the active lines to specified value. Increase the active lines. Decrease the active lines. Show the active lines. Enable Film Mode (auto senses for 3:2 or 2:2 pull down) Disables Film Mode (locks de-interlacer to 2:2 pull down). View the currently displayed film mode setting. (0= disabled, 1= enabled) Set input aspect ratio to 16:9. Set input aspect ratio to 4:3. View the current input aspect ratio. (0= 16:9, 1= 4:3) Blanks selected input. Displays selected input. View the blanking status (0= disabled, 1= enabled). Sets color level to X8%. Increments color level. Decrements color level. View current setting. Sets tint level to X8%. Increments tint level. Decrements tint level. View current setting. N X7* = Active pixel X7( = Active line X8) = 0 or 1 X8% = Picture adjustment: +/- 100 of the default value for video and +/- 127 for RGB +/- 127 of the default value 0 to 127 DVS 304 • Serial Communication 3-9 Serial Communication, cont’d Command/response table for SIS commands (continued) Command ASCII Command (host to scaler) Response (scaler to host) Additional description Contrast Specific value Increment up Increment down View Brightness Specific value Increment up Increment down View Detail Filter Set detail level Increment up Increment downView detail value Horizontal Shift Specific value Increment up Increment down View Vertical Shift Specific value Increment up Increment down View Horizontal Size Specific value Increase Size Decrease Size View Vertical Size Specific value Increase Size Decrease Size View X8%^ + ^ – ^ ^ X8%Y + Y – Y Y X8%D + D – D D X8^H + H – H H X8^/ + / – / / X8&: +: –: : X8&; +; –; ; Con X8%] Con X8%] Con X8%] X8%] Brt X8%] Brt X8%] Brt X8%] X8%] Shp X8%] Shp X8%] Shp X8%] X8%] Hph X8%] Hph X8%] Hph X8%] X8%] Vph X8^] Vph X8^] Vph X8^] X8^] Hsz X8&] Hsz X8&] Hsz X8&] X8&] Vsz X8&] Vsz X8&] Vsz X8&] X8&] Sets contrast level to X8%. Increments contrast level. Decrements contrast level. View current setting. Sets brightness level to X8%. Increments brightness level. Decrements brightness level. View current setting. Specify the detail level to X8%. Increase the detail level. Decrease the detail level. Show the detail setting. Set horizontal centering to X8%. Shift window right. Shift window left. Horizontal centering value is X8%. Set vertical centering to X8^. Shift window down. Shift window up. Vertical centering value is X8^. Set horizontal sizing to X8&. Widen the window. Make the window narrower. Horizontal sizing value is X8&. Set vertical sizing to X8&. Make the window taller. Make the window shorter. Vertical sizing value is X8&. N X8% = Picture adjustment: 0 to 127 X8^ = H and V position Values depend on current output rate X8& = H and V size Values depend on current output rate X8* = Zoom 100 to 200% 3-10 DVS 304 • Serial Communication Command ASCII Command (host to scaler) Response (scaler to host) Additional description Zoom Mode Zoom in +{ Zom X8*] Zoom in, make the window larger. Zoom out –{ Zom X8*] Zoom out, make the window smaller. Set zoom value X8* { Zom X8*] Set zoom percentage from 100% (default) to 200%. View { X8*] View zoom percentage. Pan Right +1 HpnX8(] Left –1 HpnX8(] Up –2 VpnX8(] Down +2 VpnX8(] Output Scaler Rate N Add a leading 0 when it is a single digit value Set output rate X9!* X9@= RteX9!*X9@] Select output resolution and refresh rate. View output rate = X9!*X9@] Show selected output rate. Output Sync Format Set format 6* X9$# SynX9$] Set current output sync format setting. View setting 6# X9$!] View currently set output sync format. Set polarity 7* X9## PolX9#] View format 7# X9#!] Memory Presets (input 1 to 4) Recall preset 1* X9%. 1RprX9%] Recalls memory preset X9%for selected input. Save preset 1* X9%, 1SprX9%] Saves memory preset X9%for selected input. Input Presets (for input 4 only) Recall preset 2* X9^. 2RprX9^] Recalls input 4 preset X9^. Save preset 2* X9^, 2SprX9^] Saves input 4 parameters to X9^. Write/Read input preset name Write preset name Esc X9^,X8$ NG} NmgX9^,X8$] Name preset X9^as “X8$”. Read preset name 2* X9^, 2SprX9^] Save preset X9^as “X8$”. N If a preset has not been saved, then X8$displays [unassigned]. The preset name is also the OSD text label that displays on the screen when recalled. Changing the input preset name also updates the OSD text label of that input. N X8) = 0 or 1 X8$ = Text label/Preset name: Up to 16 characters X8( = Pan (Values depend on current output rate and zoom %) X9! = Output resolution 1 to 22 for resolutions 640 x 480 to 1280 x 800 (see page 3-7) X9@ = Output refresh rate: 1 to 6 for rates 24 Hz to 120 Hz (see page 3-7) X9# = Output polarity: 0 = H - / V -, 1 = H - / V +, 2 = H + / V -, 3 = H+/ V + X9$ = Output sync format: 0 = RGBHV (default), 1 = RGBS, 2 = RGsB, 3 = Y, R-Y, B-Y X9% = Memory presets: 1 to 3 X9^ = Input 4 presets: 1 to 128 DVS 304 • Serial Communication 3-11 Serial Communication, cont’d Command/resp...

Herunterladen

Geben Sie zwei Ziffern: