Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Ashly Dateigröße: 599.42 kb Dateiname: Unterrichtssprache:

8-200Hz Power Requirements: Shipping Weight: Dimensions: I/O Connectors: o 120VAC, 50-60HZ, 12W 10 lbs 19"L x 3.5"H x 6"D XLR and 1/4" 120VAC, 50-60HZ, 12W 10 lbs 19"L x 3.5"H x 6"D XLR and 1/4" 120VAC, 50-60HZ, 12W 15 lbs 19"L x 5.25"H x 6"D XLR and 1/4" Architect's Specification GQ-215 GQ-131 GQ-231 The graphic equalizer shall be stereo (2* channels), Each channel shall consist of 15 bands centered on standard ISO frequencies at intervals of 2/3 octave and covering a frequency range of 2511* to 16kHz. Individual bands shall be activated by linear slide faders with a 45mm travel, rneial actuator shafts and a tactile center detent. Hie range of equalization per band shall be ±l5dB. The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum In/out level of +2QdBV, Frequency response shall be ±,25dB 10Hz to20klfz. Hum and noise shall be at least -97dBV and SMPTE Intermodulatlon distortion or THD sliall be less than .01% at full output Input impedance shall he 20kii balanced, lOkil unbalanced. Output impedance shall be 200£1, Inputs and outputs shall be active (transformerlessj balanced type on both XLR and I/4" phone jacks. Individual filters shall be Wein-bridge (>7» and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slkler setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat] position. Individual fillers shall be accurate to within 2% of indicated center frequency and shall be non adjustable to insure long term accuracy. The equalizer shall also include a 12dB per octave high pass filter at 40Hz, equipped with a bypass switch. An LED Indicator shall show overload conditions. Input gain shall be adjustable over a range of ±15dB, and an overall EQ bypass switch shall be indudcd.The equalizer shall weigh 9.5 lbs net and mount in a standard 19” rack using 2 spaces (3-5" high). The power requirement shall be 110-115VAC. 50-60Hz, 12W. The unit shall be an ASHLY AUDIO GQ-215. Hie graphic equalizer shall lie monoaural (I channel]. Ii shall consist of 31 bands centered on standard ISO frequencies at Intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual bands shall be activated by linear slide faders with a 45mm travel, metal actuator shafts and a tactile center detenL Thr range or equalization per band shall be cither +6dB or ±15dB sclcctcd via a 2-post* tion switch. The equalizer shall have a gain of unity with all sliders ccnicrcd, and shall have a maximum in/oul level of +26dBV. Frequency response shall be ±.2SdB 10Hz io20kllz. limn Find noise shall be at least -97dBV and SMITE iutermodulailon distortion or THD shall be less than .01% at full output, Input impedance shall be 44kfl balanced, 22kii unbalanced. Output impedance shall be 2G04L Inputs and outputs slmll be active (transformerless) balanced type on both XLR and I /4" phone jacks. Individual filters shall he Wein-bridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any sli...

Herunterladen

Geben Sie zwei Ziffern: