Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Car Audio - SAHE70 (664.54 kb)
Car Audio - SAHE70 (1.78 mb)
Car Audio - SAHE70 (1.3 mb)
Anleitung Zusammenfassung
The button lights when digital is selected. DVD 6ch/2ch input select button [DVD 6CH INPUT] For switching between 6-channel and 2-channel DVD input. Subwoofer level button [SUBWOOFER] Adjust the level in 5 steps SW MIN, SW 5, SW 10, SW 15, and SW MAX. Select SW — to stop output. Tone/balance adjust buttons [BASSVTREBLE, BALANCE, +, L, R] For adjusting the tone and balance. First select BASS, TREBLE, or BALANCE, then press [-, L] or (+, R} to adjust. Program format indicators [L, C, R, S, SL, SR, LFE] Show the channels contained in the digital input signal. They do not light when input is analog. L: Front channel (left) C: Center channel R: Front channel (right) S: If the surround channel is monaural. SL: Surround channel (left) SR: Surround channel (right) LFE (Low Frequency Effect): Deep-bass effect. Signal format indicators _ [FIX, □□ PRO LOGIC I, PCM, EH, □□ DIGITAL] Light depending on the source you are playing. 3] DIGITAL: Dolby Digital sources ES : DTS sources Q] PRO LOGIC II: Analog sources in SURROUND mode Digital sources with 2-channel signals in SURROUND mode FIX: PCM FIX or DTS FIX mode PCM: PCM FIX mode For your reference • When playing videotapes The picture remains on the screen even if you select TAPE, CD, or TUNER. • Once you have set a mode (DSP, digital/analog input, or 2-chan nel/6-channel input) for an input source That mode is engaged whenever you reselect the input source. • When DVD 6CH input is on Speaker settings are ineffective. Change the settings on the DVD player if necessary. • When input is DIGITAL The tape monitor cannot be used. • When using a graphic equalizer Some distortion may occur, depending on the equalizer’s settings. • To adjust the tone The STEREO DSP mode must be on and input must be either analog or PCM signals. You cannot adjust the tone while the DSP is defeated or if DVD 6CH INPUT is selected. • When using the subwoofer You cannot adjust subwoofer level while the DSP is defeated or if DVD 6CH INPUT is selected. Sound can be distorted if you raise the volume while subwoofer level is high. Reduce subwoofer level if this occurs. RQT6193 Presetting Other settings ___. TIJMING (2) Press [ ii v I a II ] to tune to “FM 87.9 MHz . (3) Press and hold [S ]. The FM stations the unit can receive are preset in channels 1 to 30. -BMC 0 Press [-"<5*3 to select “AM”. TUNNG (D Press [ ll v I a ii ] to tune to “AM 530 kHz . ©Pressand hold [S']. The AM stations the unit can receive are preset in channels 21 to 30. (FM stations are replaced if any were preset in these channels.) During automatic presetting, the memory indicator (El) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset. The last station to be preset is displayed when presetting finishes. Preset the stations one at a time. 0 Tune to the station. © Press [S]. ✓Tv _ _ TUNING (3) Press [ i vivi ] to select a channel. © Press [S]. §eiM3teE)(sCiEija^ © Press [H]. The channel number flashes for about 5 seconds. (2) Press [ii Ju ii]. Hold down the buttons to change channels faster. For your reference Even if the power supply cord is disconnected from the household AC outlet, the stations remain in memory for approximately one month. Improving reception • DSP DEFEAT » Press and hold [ ] until “DEFEAT” appears. CS> cs> Press and hold [ p—| ] again to turn the DSP on. Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio clarity. It reduces the peak level in loud scenes without affecting the sound field. OFF: The software is played with the original dynamic range (factory setting). STANDARD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing). © Press [ ii ^ 11 ie~i1 sfcwooe] at the same time to enter the setting mode. (2) Press [Q= 3 ► ’1 sreuo« ] to select “DR-COMP”. (D Turn [ ([% ] to select “OFF”, “STANDARD” or “MAX”. ® Press [ICT 3 I ► ll SFCUOK ] at the same time to exit the setting mode. DIMMER ®0Hl QGD3 QQKfiffe QSC? (*I3GQ37 Q^SCSODQg) GtB © G®®0uD The factory setting is OFF (normal brightness). 0 Press [icgr □ I ► ijtfcnnxt ] at the same time to enter the setting mode. (2) Press [ ir^= J ._* jjsfCKioe ] to select “DIMMER”. (D Turn [ (fl) ] to select “OFF” or “ON”. (4) Press [(mm]«««] at the same time to exit the setting mode. While the DSP is defeated, you cannot: - Select DSP sound modes, - Adjust the tone, - Output a test signal, - Adjust individual speaker output, or - Use digital input. • For your reference DVD players can interfere with radio reception. Turn the DVD player off or move it further away from the antennas if this occurs. Making a recording Using outdoor antennas rasæBâta® ®od a (ëç© öaäS ©?W§ß You can record to a tape deck connected to TAPE REC (OUT) or to a VCR c...