Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Symptom Check these things TV is not turned on Be sure the power cord is plugged in. Good picture , no sound The MUTE function may be used. Adjust the volume of the TV set. Poor color / tint, good sound The contrast, color and tint may be incorrectly adjusted. If you change the direction of the TV while the TV is on, the picture may suffer from color shading. If so, turn off the TV and allow about 30 minutes to cool, then turn on the TV again. Spots appear on the screen The broadcast signal may be jammed by other electrical sources such as cars, motorcycles, electric trains, high tension lines, neon signs, hair dryers. Lines appear on the screen The broadcast signal may be jammed by other TV receivers, personal computers, and TV games, as well as interference from radio stations. Double images or ghosts Interference may be due to broadcast waves reflected from mountains or buildings. Check if the direction of the antenna is changed. Snowy picture or black screen The antenna may be disconnected or falling out. Check if the direction of the antenna is changed. Remote control does not work The batteries in the remote control may be exhausted. The batteries may be improperly installed. Check if there are obstacles between the remote control and the remote (infrared ray) receiver. Check if there is strong light interference around the remote (infrared) receiver. Check if the main power is ON. The following conditions are not troubles Clacking noise inside the receiver It may result from the expansion of the shell caused by a temperature change. This will not affect the picture and sound quality. Uneven colour in a certain portion of the screen If the picture is too bright, this may occur according to the nature of the pictures. Reduce the contrast, and it may resume to normal. CAUTION In case of problems, have your TV serviced by qualified personnel.Never attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Specifications The specifications offered you here are only for reference and, with the improvement of the products, there may be some different between the description and the practicality. Specifications Color system PAL AV NTSC3.58 NTSC4.43 Sound system DK(BG,I,M) Sound output power 3W Size mm 576 W x491 D x441 H mm 21FA1/21TA1/21TA1(S) /21TA1(D)/21TA1(B)/21TA1(BG) 576 W x475 D x458 H mm 21F9K 603 W x475 D x430 H mm 21F9D/21T9D/21T9D(S) /21T9D(D)/21T9D(B) 424 W x344 D x343 H mm HT-3768/37T6D-T 365 W x375 D x345 H mm HT-3728 410 W x365 D x348 H mm 15F6B 472 W x620 D x454 H mm 21F7A Accessories Remote control X1 Owner's manual X1 Circuit diagram X1 Warranty card X1 Battery(AA) X2 MODEL Picture tube Power consumption HT-3728 HT-3768 14 color picture tube(the viewable dimension is 34cm) 60W 15F6B 15 color picture tube(the viewable dimension is 34cm) 70W Other models21 color picture tube(the viewable dimension is 51cm) 70W Warranty card and circuit diagram are only for the special country or area. Power supply input list Country or Area Power supply input Korea ~90V-240V, 50/60Hz Mongolia, Moldova, Cyprus, Russia, Turkmenstan, Ukraine, Latvia, Bulgaria ~150V-250V, 50Hz Jordan, Oman, UAE, Lebann,India, Yemen, Kuwait, Bahrain ~160V-250V, 50/60Hz Indonisia ~150V-240V, 50Hz or ~150V-250V, 50/60Hz Philippine ,Srilanka Bengal ~150V-240V, 50/60Hz New Zealand, Australia,Malaysia ~150V-250V, 50/60Hz Hong Kong, Algeria, Nepal, Turkey ~220V, 50Hz Yugoslavia ~220V-230V, 50/60Hz Saudi Arabia, Pakistan ~90V-250V, 50/60Hz The actual voltage and frenquency of the TV set is different for the country or area. 0090504564A ...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - 15F6B, 21TA1(B) (1.87 mb)
Receiver und Verstärker - 21F7A (1.87 mb)
Receiver und Verstärker - 21F9D, 21T9D, 21F9K, 21TA1(S), 21TA1(D), 21FA1, 21TA1, 21T9D(D), 21T9D(S), 21T9D(B), 21F7A, HT-3728, (1.87 mb)
Receiver und Verstärker - 21TA1(BG) (1.87 mb)