Login:
Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Anleitung Furman Sound, modell RackRider RR-215

Hersteller: Furman Sound
Dateigröße: 107.05 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Clip LED: Indicates a distortion-causing overload. Adjust the Level control to compensate for clipping. EQ Sliders: These sliders allow boost or cut of either ±6 dB or ±12 dB (depending on the setting of the Range switch) over a narrow frequency band. Ground Lift: Fights hum or buzz by separating the signal and chassis grounds. W WWWWWARRANTY INFORMA ARRANTY INFORMAARRANTY INFORMAARRANTY INFORMAARRANTY INFORMAARRANTY INFORMATION TIONTIONTIONTIONTION The RackRider RR-Series Graphic Equalizers are protected by a limited ninety (90) day warranty covering manufacturing defects. Warranty service is provided by Furman at the address below. SPECIFICA SPECIFICASPECIFICASPECIFICASPECIFICASPECIFICA TIONS TIONSTIONSTIONSTIONSTIONS Channels: RR-131: one; RR-215, RR-231: two Bands per Channel: RR-215: 15 (25, 40, 63, 100, 160, 250, 400, 630,1k, 1.6k, 2.5k, 4k, 6.3k, 10k, 16k) RR-131, RR-231: 31 (20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20k) Boost/Cut Range: ±6 dB or ±12 dB, switch selectable Slider Travel: 20 mm with center detent Input Connections: Active balanced XLR and ." TRS; unbalanced RCA Impedance: Input: 20 k. balanced; 15 k. unbalanced; Output: Less than 600 . Maximum Levels: Input: +18 dBV; Output: +16 dBV Signal to Noise Ratio: 93 dB at 1 kHz Distortion: .02% THD, 1 kHz, all sliders at center Frequency Response: 20 Hz to 50 kHz, +0, -3 dB, all sliders at center High Pass Filter: RR-131, RR-231: 10 Hz To 250 Hz Variable; RR-215, 40 Hz fixed; 12 dB/octave Low Pass Filter: RR-131, RR-231: 3 kHz To 50 kHz Variable; RR-215: 16 kHz fixed; 12 dB/octave Dimensions (W X D X H): RR-215, RR-131: 19" X 8.66" X 1.75"; RR-231: 19" X 8.66" X 3.5" Weight: RR-215, RR-131: 5.22 lbs (2.9 kg); RR-231: 9.36 lbs (5.2 kg) Power Requirements: 100-120 VAC, 60 Hz, or 200-240 VAC, 50 Hz, switch selectable; 15 watts Safety Agency Approvals: CE, TUV, EMC. Pending: NRTL 3-0110 963002-2751 ...

Dieses Handbuch ist für folgende Modelle:
Receiver und Verstärker - RackRider RR-131 (107.05 kb)
Receiver und Verstärker - RackRider RR-231 (107.05 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien