Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Cambridge Audio Dateigröße: 991.87 kb Dateiname: Unterrichtssprache:

Press the Select/Mode button on the front of the unit to select the correct mode. Sonata AR30 1. In tuner mode press the Band button to toggle between AM/FM modes (and SIRIUS if an optional SIRIUS–Ready module is attached, US version only). 2. Press and hold the • button to scan to previous available stations or press and hold the • button to scan to the next available stations. 'SCANNING' will be displayed while scanning for available stations as shown below. 3. Short press once the • or • button to fine-tune station frequency. 17 ENGLISH Operating instructions (continued) Sonata DR30 1. In tuner mode press the Band button to toggle between DAB/FM modes. 2. In FM mode, press and hold the • button to scan to previous available stations or press and hold the • button to scan to the next available stations. 'SCANNING' will be displayed while scanning for available station as shown previously. Briefly press the • or • button to fine-tune the station frequency. 3. To perform a complete scan of the DAB broadcasting band, press and hold the • button to enter the scan menu. Rotate the Volume control or press the volume control on the remote to select 'Yes'. Press the Volume control or Select on the remote to confirm and proceed with the scan. Note: In some regions, the complete scan process can take up to three minutes to complete. 4. In DAB mode, press the • or • button to browse through the stations currently stored in the tuner’s database. To select a station, either press Select on the remote control, or Select/Mode on the front of the unit. Alternatively, the currently viewed station will be selected automatically if no button is pressed for five seconds. Setting presets Radio stations can be stored into the memory presets for easy access. You can store up to 20 presets for each band (for example, 20 presets for the AM band plus 20 presets for the FM band and 20 presets for the DAB band). 1. Select the station you wish to store and hold down the Select button. The display on the unit shows the next available preset. 2. Rotate the Volume control on the front of the unit or press the volume control on the remote to move to a new preset number and press Select to store the preset. The display will briefly show that the station has been stored. 3. To load a stored preset, simply press the number on the remote control that corresponds with the preset you wish to access. Use -/-- on the remote when loading stored presets greater than 9. Note: Stored presets can be replaced by saving a new desired station into any preset. AR30 DR30 Setting the clock By default, the clock will set itself according to the clock data transmitted by SIRIUS, DAB or RDS enabled FM broadcasts. If you are not in a region where you can receive these transmissions, you can set the clock manually. To set the clock time: 1. Press and hold the Volume control on the front of the unit to enter the advanced settings menu. 2. Cycle through the different settings by pressing the Volume control or pressing the volume control on the remote. 3. When 'Clock Aut' is displayed, rotate the Volume control or the volume control on the remote to change the setting to 'Clock Man'. Press the Volume control or the volume control on the remote to confirm your choice. 4. Change the hour by rotating the Volume control or pressing the volume control on the remote. Press the Volume control or the Menu button on the remote to confirm, and proceed to adjust the minutes in the same manner. 5. When you have finished setting the time, press the Volume control or the Menu button on the remote to return the unit to normal operation. Setting the time zone (US version only) If the Sonata AR30 is configured for automatic time-set, and the unit is connected to a SIRIUS tuner module, it is important to specify the appropriate time-zone for your geographic region. To set the time zone: 1. Enter the advanced settings menu and select 'Clock Aut', refer to previous section 'Setting the clock'. The unit will display the current time zone.See below for the appropriate time zone: Zone NST = GMT-3h30 (Newfoundland) Zone AST = GMT-4h (Atlantic) Zone EST = GMT-5h (Eastern) Zone CST = GMT-6h (Central) Zone MST = GMT-7h (Mountain) Zone PST = GMT-8h (Pacific) Zone AKST = GMT-9h (Alaska) 2. Rotate the Volume control on the front of the unit until your desired time zone is displayed. Press the Volume control to confirm Please continue to set the Daylight Saving Time to either 'DST On' or 'DST Off'. If set to 'On', then USA/Mexico/Canada daylight saving will be observed. 3. When you have finished setting the time zone, press the Volume control to return the unit to normal operation. ENGLISH 19 Operating instructions (continued) Setting the alarm The alarm function can turn on the unit at a chosen time. When the alarm activates it will either select the MP3 source and play your iPod, or select the tuner band of your choice and preset 1 in that band. To set the alarm time: 1. Press the button on y...

Herunterladen

Geben Sie zwei Ziffern: