Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Atlas Sound Dateigröße: 231.9 kb Dateiname: Unterrichtssprache:

The hat sections include a rack rail slot along with holes spaced the entire length of the hat section to allow for easy, secure positioning of the rack rails. This newly designed hat section is also spaced in the cabinet to allow the installation of standard 19" blank panels vertically inside the cabinet. This is perfect for "stick-on" type accessories like Atlas Sound DC power supplies & relays. Hat sections also feature slotted cut-outs for clean, organized wire management. For optimum wire management, unique, removable 2RU high panels are positioned behind cutouts at the top & bottom on the rear of the cabinet. These panels include a variety of knockouts ranging in size from 3.8" to 11.4" to facilitate rigid or flexible conduit. 3.8" knockouts (x2) are also included on this panel to allow installation of BNC connectors commonly used for diversity wireless microphone systems. The cabinet top sections offer large, vent openings for maximum ventilation. This comes in especially handy when thermal sensitive amplifiers and/or digital rack mount equipment are mounted in a FMA cabinet. Leg levelers are included with the FMA series at no additional cost to provide alignment regardless of floor evenness but in instances where maneuverability of the cabinet is required, an optional caster kit allows easy positioning without significantly increasing the cabinet’s overall height. Cabinets include two pair (front/back) 11 gauge plated steel rack rails tapped 1032 and include the new Atlas Sound RU indicators to aid in aligning equipment during installation. Threaded inserts are included on the front of the cabinet to save installation time when a front door is required. Optional FMA series side panels "swing–out" for easy serviceability of equipment housed in the cabinet while maintaining security. These heavily reinforced side panels install easily on unique "lift-off" hinge assemblies. All mounting holes and cabinet hardware is provided to join multiple FMA & G series cabinets. UL listing & seismic rating pending. OPTIONAL ACCESSORIES Vented side panels Matches FMA44-36LRPV – FMA44-36G Matches FMA44-25LRPV – FMA44-25G Matches FMA35-25LRPV – FMA35-25G FMARTK25 Includes (2) locking swivel and (2) rigid casters with mounting hardware. For FMA44-25G and FMA35-25G models only Perforated top panels TPP-19-25-962 – Matches FMA44-25G, FMA35-25G Solid top panels TPS-19-25-962 – Matches FMA44-25G, FMA35-25G TPS-19-36-962 – Matches FMA44-36G High power top mounting fan kits EFT19-25-962 – Matches FMA44-25G, FMA35-25G MODEL Rack Rail to 1.0" Front Door Clearance (with front rack rail in foward most position)* Rack Rail to 3.0" Front Door Clearance (with front rack rail in forward-most postition)* Overall Usable Mounting Depth (front rail face to rear rail face with rails at full front extension front to back) Front Rack Rail to Rear Door Clearance (with front rack rail in farthest forward position) FMA44-36G 2.0" (50.8mm) 3.813" (96.8mm) 34.08" (865.6mm) 34.98" (888.5mm) FMA44-25G 2.0" (50.8mm) 3.813" (96.8mm) 23.58" (598.9mm) 24.48" (621.8mm) FMA35-25G 2.0" (50.8mm) 3.813" (96.8mm) 23.58" (598.9mm) 24.48" (621.8mm) * Does not account for 3.5" area in center of cabinet where door handle and lock could cause interference with equipment knobs if rack rails ar...

Herunterladen

Geben Sie zwei Ziffern: