Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.7 Panel Description 1.7.1 Front Panel 1 2 3 4 5 6 1. DIP Swtich 2. HDMI / DVI Switch Button 3. HDMI Input 4. DVI / VGA Input 5. Power Indicator 6. Power Connector 1.7.2 Rear Panel 1 2 3 4 1. S/PDIF OUT 2. STEREO OUT 3. COMPONENT / VGA OUT 4. VGA / COMPONENT Switch Button 1.7.3 DIP Switch PIN # Mode 1 ON . Learn EDID from VGA socket and save EDID to HDMI socket 1 OFF . Write back default EDID to HDMI socket 2 ON . Learn EDID from VGA socket and save EDID to DVI socket 2 OFF . Write back default EDID to DVI socket 1.8 Installation To setup Avenview C-HDMI-COMPVGA follow these steps for connecting to a device: 1. Power off display source such as DVD Player, Set-top box etc 2. Connect your HDMI and/or DVI source to HDMI input and/or DVI input 3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack 4. Connect VGA/Component Y cable to C-HDMI-COMPVGA 5. Connect other end of VGA/Component Y cable to VGA or Component input of display 6. Plug in 5V DC power cord to power jack of C-HDMI-COMPVGA 7. Power on C-HDMI-COMPVGA converter 8. Power on HDMI and/or DVI source and display with VGA or Component input. S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format. C-HDMI-DVIA only separates the digital audio in HDMI stream and bypasses this decoded audio to the output. This version does NOT support 8 Channel analog audio applications S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48 KHz audio sample rate. Section 2: Specifications Item Description Units C-HDMI-COMPVGA Unit Description HDMI / DVI to Component / VGA with Audio Converter HDMI Compliance HDMI 1.2a DVI Compliance DVI 1.1 Video Bandwidth Single Link: 165MHz (4.95Gbps) Video Support Single Link: 1080p 60, WUXGA (1920x1200@60Hz) Component Video: 720p / 1080i Audio Support Stereo Audio Input TMDS Signal 1.2 Volts (peak-to-peak) Input DDC Signal 5 Volts (peak-to-peak, TTL) Input 1 x HDMI 1 x DVI Output 1 x VGA 1 x RCA digital Audio 1 x 3.5mm analog Audio Component through VGA to Component Adapter HDMI Connector Type A (19 pin female) DVI Connector DVI-I (29-pin female digital only) VGA Connector HD-15 (15-pin D-sub female) RCA Connector Coaxial S/PDIF Digital Audio (PCM 48kHz) 3.5mm Audio Connector Analog Stereo Audio Switch Control 2 x Push Button (1. HDMI / DVI Input button / 2. VGA / Component Output button) DIP Switch 2-pin for EDID learning Dimensions (L x W x H) 5” X 3.9” x 1.1” Power Supply 5V 2A DC Power Consumption 4 Watts (max) Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) 2.1 Supported Resolutions 2.1.1 DVI or VGA Supported Mode Resolution VESA 640x400 @85Hz VESA 720x400 @85Hz VESA 640x480 @60Hz VESA 640x480 @72Hz VESA 640x480 @75Hz VESA 640x480 @85Hz VESA 800x600 @60Hz VESA 800x600 @72Hz VESA 800x600 @75Hz VESA 800x600 @85Hz VESA 1024x768 @60Hz VESA 1024x768 @75Hz VESA 1024x768 @85Hz Supported Mode Resolution VESA 1152x864 @60Hz VESA 1152x864 @75Hz VESA 1152x864 @55Hz VESA 1280x768 @60Hz VESA 1280x768 @75Hz VESA 1280x768 @85Hz VESA 1280x960 @60Hz VESA 1280x960 @85Hz VESA 1280x1024 @60Hz VESA 1280x1024 @85Hz VESA 1600x1200 @60Hz VESA 1920x1200 @60Hz 2.1.2 HDMI or Component Video (YPbPr) Supported Mode Resolution EIA 720x480p @59.94 (60)Hz EIA 720x576p @ 50Hz EIA 1280x720p @59.94 (60)Hz EIA 1920x1080i @59.94 (60)Hz NTSC 712x484 PAL 702x574 Notice 1. Only HDMI enabled TV sets with under-scan/over-scan support, the full active video can be accurately displayed. Some HDMI equipped TV sets may not support this feature. If under-scan/over-scan* is NOT supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF audio may not sound right. 2. Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel analog audio applications. 3. S/PDIF audio input supports the main 2-channel audio input 4. S/PDIF supports only 48kHz audio sample rate. Other than this rate, the input digital audio should be adjusted to 48kHz in order to get audio signal correctly sent. The under-scan mode displays the full video frame, which reveals content on the edge that is recorded. In over-scan, the field monitor zooms in to the area that would be visible on most televisions. Set the field monitor to under-scan if your video will be viewed on a computer monitor or shown with a projector and also to look for light stands, micr...