Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
CONNECTORS Antenna Connector: 7/16 DIN female BTS Connector: 7/16 DIN female ENVIRONMENTAL Operating Temperature: -40°C to 60°C Lightning Protection: IEC 61000-4-5 Vibration Storage: ETS3019-1-1 Transport: ETS3019-1-2 Operation: ETS3019-1-3 REGULATORY EMC: ETS300 342-2 APPROVALS FCC: Part 15, Class A UL: 1950 QUALITY MTBF: 900,000 hours 4w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 2/08 • 105192AE ClearGain ® Ground Mounted Aplifiers ClearGain® Ground-Mounted Amplifiers DD1900 Full Band with DD800 Diplexer The DD1900 Full Band with DD800 Diplexer GMA amplifies the full 1900 MHz band to maximize signal quality and optimize coverage while passing through the 800 MHz band without amplification. This allows the 1900 MHz system to be amplified without affecting the existing 800 MHz system. The ClearGain DD1900 Full Band with DD800 Diplexer GMA features a slim, modular system that can be used in a three sector BTS or an Omni BTS. The amplification module is only 2RU high. Therefore, an entire GMA configured for a three-sector BTS will only take up 7RU in a 19" rack. 1900 Antenna 800 Antenna Base Station 800 ANTBTS 800/1900 Diplexer 800 BTS1900 BTS 1900 ANT 1900 GMA w/800 Diplexer 1900 BTS 800 BTS 5w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 2/08 • 105192AE ClearGain ® Ground Mounted Aplifiers ClearGain® Ground-Mounted Amplifiers DD1900 Full Band with DD800 Diplexer Typical Specifications ELECTRICAL Nominal Impedance of RF Inputs and Outputs: 50 Ohm Frequency Range TX: 1930-1990 MHz RX: 1850-1910 MHz Passband (RX) Gain: 13 dB Noise Figure: 1.0 dB Dynamic Range Input at 1 dB Gain Compression: +3 dBm IIP3: +15 dBm Insertion Loss TX Path (TX to ANT): .4 dB 1915 MHz Rejection: <15 dB 1916 MHz Rejection: <30 dB Isolation in Tx Path: 80 dB Rejection 824-894 MHz: 80 dB Max Input Power: +10 dBm Passband Return Loss TX Band: >18 dB RX Band: >18 dB Intermodulation: -120 dBm Maximum Input Power (RMS Power): 250 W TX Filter Rejection in RX Band: 40 dB POWER Operational Voltage: 7 to 20 Vdc Operational Current: 140 ± 10 mA Alarm Current Level: 350 ± 20 mA PHYSICAL (Three Sector Site with Diversity) Dimensions (HxWxD): 12.25 in x 19 in x 12.5 in Weight: 80 lbs. CONNECTORS Antenna Connector: 7/16 DIN female BTS Connector: 7/16 DIN female ENVIRONMENTAL Operating Temperature: -40°C to 60°C Lightning Protection: IEC 61000-4-5 VIBRATION Storage: ETS3019-1-1 Transport: ETS3019-1-2 Operation: ETS3019-1-3 6w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 ClearGain® Ground-Mounted Amplifiers 2/08 • 105192AE ClearGain ® Ground Mounted Aplifiers Power Distribution Unit Time and space are important considerations when selecting and installing wireless components at base transceiver station sites. The simple, compact design of ADC’s ClearGain® Power Distribution Unit (PDU) is intended to help service providers save both. From a compact unit that is easily mounted on a wall or a rack, ClearGain PDUs provide power and alarming for ADC’s ground-mounted amplifiers. Features: • Provides power and alarm functions for on-site monitoring of Ground Mount Amplifiers (GMAs) • Wall-or rack-mountable to fit available space • LED indicators for alarm functions • Simple, compact design allows for easy installation and connections 7w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 2/08 • 105192AE ClearGain ® Ground Mounted Aplifiers ClearGain® Ground-Mounted Amplifiers Power Distribution Unit Typical Specifications ELECTRICAL Input Voltage: 20-56 Vdc positive/negative ground Output Voltage: 18 Vdc each Maximum Current Drawn: 3.8A PHYSICAL Dimensions (HxWxD): 43 x 196 x 103 mm (1.69" x 7.72" x 4.06") Weight: <460 g Color: Silver CONNECTORS Output for GMAs: SMB, male (qty 6) Power Connector: 4-pin male General Alarm Connector: 3-pin male Indicators Singlemode PDU: Green OK/NOK LEDs Red General Alarm LED Alarm output LEDs Alarm output is isolated 3-pin relay connection Normally open and normally closed connection available ENVIRONMENT Storage: ETS3019-1-1 Transport: ETS3019-1-2 Operation: ETS3019-1-3 Housing: IP40 Temperature Range (Indoor Use): -20.C to +65.C (-4.F to +149.F) Lightning Protection: IEC 1000-4-5 EMC Approvals: UL QUALITY MTBF 250,000 hours. Manufactured under ISO 9001 quality system ACCESSORIES Basic Accessories: Power supply cable (10 m), alarm cable (10 m), grounding cable (2 m) and wall mounting screws Optional Accessories: Mounting hardware for 19" rack mount 8w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 ClearGain® Ground-Mounted Amplifiers 2/08 • 105192AE ClearGain ® Ground Mounted Aplifiers Description Catalog Number ClearGain Ground Mounted Aplifiers 800 Fullband CG0800DD025DG001900FullbandCG1900DD060DG001900FullbandGMAw/800DiplexerCG1900DD060DGBPClearGain Power Distribution Unit ClearGainSingleModePDU,IncludespowercableandgroundingcableCG-PDU-SMPWRPDUMountingBracketAUX-000076Or dering Information 9w w w . a d c...