Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Harman-Kardon Dateigröße: 3.45 mb Dateiname: FB275BT_ENG.pdf Unterrichtssprache:

Adjustment mode Display. Adjustment mode Bluetooth®. Adjustment mode . Item that has 2nd level adjustment During Telephone Interrupt mode, only Balance and Fader can be adjusted. Adjustment mode is unaccessible during Telephone mode and vice versa. 1 . Press and hold the [DISP] button for 1.5 seconds or longer to enter the adjustment selection display. 2 . Press the [ , ] button to select the “item name”. “BASS” “TREBLE” “BALANCE” “FADER” “LOUDNESS” “AUX INPUT” “CLOCK” “DISPLAY” “BLUETOOTH” 3 . Push the [ ] knob to enter 2nd level adjustment or turn the [ ] knob to select the “desired setting value” depends on the selected item. Notes: A“ ” will be displayed and “ ” will light on when an item has 2nd level adjustment. ] button for 1.5 seconds or longer to return to the previous mode. After completing settings, press and hold the [ If no operation is performed for more than 10 seconds, the Adjustment mode is cancelled and returns to the previous display. Audio mode Adjusting the bass 2 - 1 .Select “BASS”. 3 - 1 .Turn the [ ] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. Notes: The factory default setting is “0”. The value range is -7 to +7. Adjusting the treble 2 - 1 .Select “TREBLE”. 3 - 1 .Turn [ ] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. Notes: The factory default setting is “0”. The value range is -7 to +7. Adjusting the balance 2 - 1 .Select “BALANCE”. 3 - 1 .Turn the [ ] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The display changes as follows: “RIGHT XX” will be displayed where “XX” is the value from 1 to 12. “LEFT XX” will be displayed where “XX” is the value from 1 to 12. Notes: When Balance is 0, “CENTER” will be displayed instead. The factory default setting is “CENTER”. Adjusting the fader 2 - 1 . Select “FADER”. 3 - 1 . Turnthe [ ] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The display changes as follows: “FRONT XX” will be displayed where “XX” is the value from 1 to 12. “REAR XX” will be displayed where “XX” is the value from 1 to 12. Notes: When Fader is 0, “CENTER” will be displayed instead. The factory default setting is “CENTER”. 26 FB275BT / FB275BTB Common Operations Adjusting the loudnessThe loudness effect does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. 2 - 1 . Select “LOUDNESS”. 3 - 1 .Turnthe [ ] knob to select “ON” or “OFF”. ON : Loudness effect enabled. OFF : Loudness effect disabled. Note: The factory default setting is “OFF”. Setting AUX function This option allows user to enable or disable the AUX function. AUX function will be available in Source mode selection if turned on. Otherwise, it will be hidden from the Source mode selection. 2 - 1 .Select “AUX INPUT”. 3 - 1 .Turn the [ ] knob to select “ON” or “OFF”. ON : Aux function is turned on. OFF : Aux function is turned off. Note: The factory default setting is “OFF”. Clock adjustment 2 - 1 .Select “CLOCK”. 3 - 1 .Push the [ ] knob. 3 - 2 .Press the [ , ] button to select the “item name”. “CLK EN” “CLK MODE” “CLK SET” 3 - 3 .Push or turn the [ ] knob de pends on selected item. Setting the clock enable This setting allows the clock to be displayed at the bottom of display in all Source modes. 1. Select “CLK EN”. 2. Turn the [ ] knob to select “ON” or “OFF”. ON : Clock is enabled and manually set by user. OFF : Clock is disabled. Note: The factory default setting is “OFF”. Setting the clock mode This setting allows user to select either 12 or 24 hour system. 1. Select “CLK MODE”. 2. Turn the [ ] knob to select the options. “12 HR” “24 HR” 12 HR : 12 hour mode. 24 HR : 24 hour mode. Note: The factory default setting is “12 HR”. Adjusting the clock This adjustment allows the clock to be set by user. 1. Select “CLK SET”. 2. Push the [ ] knob. 3. Press the [ , ] button to select the hour or the minute. 4. Turn the [ ] knob to set the correct time. 5. Press the [ ] button to exit the setting. Notes: The factory default setting is “00:00” for 24 hour mode. The clock is updated in realtime. English FB275BT / FB275BTB 27 English Common Operations Display adjustment 2 - 1 .Press the [ , ] button and select “DISPLAY”. 3 - 1 .Push the [ ] knob to enter next level adjustment. 3 - 2 .Press the [ , ] button to select the “item name”. “SCROLL” “CONTRAST” “ILLUM” “COLOR” “USER COL.” “ANIMATION” 3 - 3 .Push or turn the [ ] knob depends on selected item. Setting the method for title scroll Set how to scroll in MP3 title. . The factory default setting is “ON”. 1. Select “SCROLL”. 2. Turn the [ ] knob to select “ON” or “OFF”. ON : To scroll continunously. OFF : Scroll function is disabled. It will onlyscroll for once. Adjusting the display contrast You can adjust the display contrast...

Herunterladen

Geben Sie zwei Ziffern: