Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
U Channel Select Button: Press this button to begin the process of trimming the channel output levels using an external audio source. (For more information on output level trim adjustment, see page 35). .Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR is muted, adjusting volume control will automatically release the unit from the silenced condition. . Input indicators: A green LED will light in front of the input that is currently being used as the source for the AVR 5550. . Main Information Display: This display delivers messages and status indications to help you operate the receiver. (See pages 7 for a complete explanation of the Information Display.) . Remote Sensor Window: The sensor behind this window receives infrared signals from the remote control. Aim the remote at this area and do not block or cover it unless an external remote sensor is installed. . Surround Mode Indicators: A green LED will light in front of the surround mode that is currently in use. 6 FRONT PANEL CONTROLS Front Panel Information Display A B E KLFHIJG D C ABCDEF Upper Display Line Lower Display Line OSD Indicator Multi Indicator Speaker/Channel Input Indicator Preset Indicator GHIJKL Memory Indicator Stereo Indicator Tuned Indicator Auto Indicator 192 kHz Indicator MNOPQ Traffic Indicator Radiotext Indicator Clock Time Indicator Program Type Indicator RDS Indicator 96 kHz Indicator A Upper Display Line: Depending on the unit's status, a variety of messages will appear here. In normal operation, the current input source name will appear on this line. B Lower Display Line: Depending on the unit's status, a variety of messages will appear here. In normal operation, the current surround mode name will appear on this line. C OSD Indicator: When the OSD system is in use, this indicator lights to remind you that the other indicators in this display do not function when the On Screen Display is being used. D Multiroom Indicator: This indicator lights when the multiroom system is active. Note that it will remain lit when the multiroom system is in use even though the main room system is in the Standby mode and all other indicators are dark. (See page 39 for more information on the Multiroom system.) E Speaker/Channel Input Indicators: These indicators are multipurpose, indicating either the speaker type selected for each channel or the incoming data-signal configuration. The left, center, right, right surround, left surround, right back surround and left back surround speaker indicators are composed of three boxes, while the sub- woofer is a single box. The center box lights when a “Small” speaker is selected, and the two outer boxes light when “Large” speakers are selected. When none of the boxes are lit for the center, surround or subwoofer channels, no speaker has been selected for that position. (See page 21 for more information on configuring speakers.) The letters inside each of the center boxes display active input channels. For standard analog inputs, only the L and R will light, indicating a stereo input. When a digital source is playing, the indicators will light to display the channels begin received at the digital input. When the letters flash, the digital input has been interrupted. (See pages 24 and 34 for more information on the Channel Indicators). F Preset Indicator: This indicator lights when the tuner is in use to show that the present number for the current station being listened to appears in the Upper Display Line. (See page 40 for more information on tuner presets.) GMemory Indicator: This indicator flashes when entering presets and other information into the tuner’s memory. H Stereo Indicator: This indicator illuminates when an FM station is being tuned in stereo. I Tuned Indicator: This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality. JAuto Indicator: This indicator illuminates when the tuner’s Auto mode is in use. K 192 kHz Indicator: This indicator lights when the input source has a 192 kHz bit rate. L 96 kHz Indicator: This indicator lights when the input source has a 96 kHz bit rate. MTA Traffic Announcement Indicator: This indicator illuminates if the RDS station tuned somtimes transmits traffic information (see page 40 for more information on RDS). N RT Text Indicator: This indicator illuminates when the RDS station tuned is transmitting radiotext (RT) data. O Clock Time Indicator: This indicator illuminates when the RDS station tuned is transmitting the CT (clock time) code, indicating the current time of day. P PTY Indicator: This indicator illuminates when the RDS station tuned is transmitting program type data, or during a PTY search. Q RDS Indicator: This indicator illuminates when the station tuned is transmitting RDS data. FRONT PANEL INFORMATION DISPLAY 7 8 REAR PANEL CONNECTIONS Rear Panel Connections AVR 5550 AC OUTLETS ~230V/5...