Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Press the ./¤ Navigation Button E and note that a complete set of alpha-numeric characters will appear with the start of the alphabet in capital letters followed by the lower-case letters and then numbers and symbols. When you press the ¤ Navigation Button E, a series of symbols and numbers will appear, followed by a reverse list of the alphabet in lower-case letters. Press the button either way until the first letter of the desired name appears. If you wish to enter a blank space as the first character, press the › Navigation Button E. When the desired character appears, press the › Navigation Button E and repeat the process for the next letter, and continue until the desired name is entered, up to a maximum of fourteen characters. Press the Set Button F to enter the input name into the system memory and to proceed with the configuration process. If your system includes any sources that are equipped with Y/Pr/Pb component video outputs, the AVR is able to switch them to send the proper signals to your video display. Each of the two Component Video Inputs may be assigned to any source for added system flexibility. The default setting is for the Component Video 2 Jacks to be assigned to the DVD and 6/8-Channel Direct Inputs, with the Component Video 1 Jacks assigned to the other inputs. If your system does not include component video at this time, or if you do not need to change these defaults, press the ¤ Navigation Button E to go to the next setting. To change the Component Video assignment, first make certain that the cursor is pointing to the COMPONENTINline on the menu screen, and then press the ‹/› Navigation Button E until you see the desired input in the highlighted video. The clicking noise that you will hear when the component video inputs is switched is normal, due to the relay used to ensure proper isolation between the two inputs. When the desired component input has been selected, press the ¤ Navigation Button E go to the next setting. If you wish to associate one of the digital inputs with the selected input source, press the ¤ Button E on the remote while the IN/OUT SETUPmenu (Figure 2) is on the screen, and note that the on-screen cursor will drop down to the DIGITALINline. Press the ‹/› Buttons E until the name of the desired digital input appears. To return to the Analog input, press the buttons until the word ANALOGappears. When the correct input source appears, press the ¤ button E until the › cursor appears next to BACKTOMASTERMENU, and press the Set Button F. To associate an analog or digital input with the input source currently selected at any time using the discrete function buttons, press the Digital Input Select Button UG on the front panel or the remote while the full-OSD is not in use. Within five seconds, make your input selection using the Selector buttons on the front panel 7$ or the ./¤ E Buttons on the remote until the desired digital or analog input is shown in the Main Information Display . and in the lower third of the video display connected to the AVR. Press the Set Button F to enter the new input assignment. When configuring the digital input for a source device such as a digital cable box or other set-top tuner product with a digital audio output where you have connected both the digital and analog outputs of the source to the AVR, select the appropriate digital input on this menu. The digital source will become the default, and the AVR will always look there first to see if a signal is present. However, if the digital data stream is interrupted for any reason, the AVR will automatically switch to the analog connection as a backup. This is particularly useful when configuring the connection for digital set top boxes, where some channels feature digital sound, but others do not. An exclusive Harman Kardon feature is the ability to switch front panel jacks from their normal use as inputs to output connections so that portable recording devices may easily be connected. The front panel analog Video 4 Jacks O are normally set as an input for use with camcorders, video games and other portable audio/video products, but they may be switched to an output for connection to portable audio/video recorders. To temporarily switch them to outputs, select the IN/OUTSETUPmenu. Press the ¤ button E until the on-screen › cursor is pointing to the VIDEO4line. Press the › button E so that the word OUTis highlighted. Note that the Input/Output Status Indicator ( between the S and Composite video jacks will turn red, indicating that the analog Video 4 jacks O are now record outputs. On the AVR, the Coaxial 3 Digital Jack O is normally an input, but it may also be switched to a digital output for use with CD-R/RW decks, MD recorders or other digital audio recorders. To change the jack to an output, press the ./¤ buttons E while the IN/OUTSETUPmenu is on the screen so that the › cursor is next to COAXIAL3. Then press the ‹/› buttons E so that the word OUTis highlighted. Note that the ...