Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
IR data cannot be transmitted from the sending unit to the receiving unit. • The RS-232C protocol is used for remote control of A/V devices at the extended display device location. The full RS-232 protocol is not supported for this purpose. 2 FEATURES Features • Immune to electro-magnetic interference (EMI) • Transmits HDMI 1.3 audio/video at full bandwidth • 1000-foot (330m) extension distance, maximum • Delivers highest quality signal of any HDMI extension method • Supports video resolutions up to 1080p, 2K, and 1920 x 1200 • Uses inexpensive and widely available single-strand multimode SC fiber optic cable • Extends RS-232C control signals from source equipment to the immediate location of the display device • HDCP Compliant HDMI 1.3 Features • 340 MHz (up to 16 bit YUV 444 supported @ 1080p) • Deep Color Supported (XV Color Supported) • Dolby TrueHD & DTS Master Supported • Lip-Sync Pass Through • CEC Protocol Pass Through Package Includes (1) HDMI 1.3 Over Fiber with IR - Sender (1) HDMI 1.3 Over Fiber with IR - Receiver (1) 6 Foot HDMI Cable (M-M) (1) 6-Ft DB9 Serial Cable (M-F) (2) 5V DC Power Supply (1) User’s Manual 3 SENDER PANEL DESCRIPTIONS Front Panel Power LED Indicator IR Blaster Output Port HDMI Input RS-232 Input Back Panel RJ-45 Port SC Fiber Optic Port 5V DC Power Input 4 RECEIVER PANEL DESCRIPTIONS Front Panel HDMI IR Receiver Output RS-232 Power LED Output Indicator Back Panel SC Fiber 5V DC Power Input RJ-45 Port Optic Port 5 CONNECTING AND OPERATING THE HDMI 1.3 Over Fiber with IR 1. Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s HDMI input port using the supplied HDMI cable. 2. Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s RS-232 input port using the supplied DB-9 serial cable. 3. For IR repeater functionality, please connect the IR emitter’s mini-jack (sold separately, part # EXT-2IREMIT) into the HDMI 1.3 Over Fiber with IR sending unit. Place the IR emitter directly on or above the IR receiver of the desired source device. 4. Connect the HDMI 1.3 Over Fiber with IR sending and receiving units together using one user supplied SC terminated multi-mode fiber optic cable and one CAT-5, CAT-5e or CAT-6 cable. NOTE: If field terminating network cable, please adhere to the TIA/EIA568B specification. Please see page 7 for more information. 5. Connect the display to the HDMI output port of the HDMI 1.3 Over Fiber with IR receiving unit using a user supplied HDMI cable. 6. Connect the RS-232 device to the RS-232 output port of the HDMI 1.3 Over Fiber with IR receiving unit using a user supplied DB-9 serial cable. 7. Plug the included 5V DC power supplies into the HDMI 1.3 Over Fiber with IR sending and receiving units. 8. Power on the display device first and the source device second. You will now have beautiful HDMI 1.3 video at resolutions of up to 1080p60 on your display device with up to 8 channels of advanced digital HDMI 1.3 audio present. 9. IR commands aimed at the Receiver unit will be intercepted and transmitted back to the Sender unit over the CAT-5 cable. The optional IR Blaster will rebroadcast IR command signals to the source equipment, simulating the local presence of the IR remote control. You will now be able to operate your HDMI source as though you are physically in front of it, while enjoying the convenience of a far away viewing location. 6 NETWORK CABLE WIRING DIAGRAM Gefen has specifically engineered their products to work with the TIA/EIA-568-B specification. Please adhere to the table below when field terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown 12345678 CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types. Gefen recommends using solid core cabling. CAT-6 cable is also recommended for best results. Each cable run must be one continuous run from one end to the other. No splices or use of punch down blocks. 7 SPECIFICATIONS Video Amplifier Bandwidth ........................................................................ 340 MHz HDMI Input/Output Connector ........................................................... type A, 19 pin Link Connector ................................................................................ SC Fiber Optic CAT5 Connector ............................................................................................. RJ45 Input Video Signal .............................................................................. 1.2 Volts p-p Input DDC Signal .......................................................................... 5 Volts p-p (TTL) Power Supply ............................................................................................... 5V DC Dimensions ........................................................... 2.8”W x 4.5”H x 1.2”D (approx) Shipping Weight ......................