Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
5 When the EDID switch is ON (set to manual), and the HDMI output color is RGB, this switch specifies the video range: limited (16-235) or full range (0-255). 6 When the EDID switch is ON (set to manual), this switch forces the output into Deep Color,12-bits or into 8 bits. 7 When the EDID switch is ON (set to manual) and DIP switch 6 is set to ON (Deep Color), this switch forces the output into 10-bit or 12-bit. LED INDICATORS 10 FIRMWARE UPDATE Things you’ll need: • Computer running Windows XP or Vista • 3GSDI Converter Firmware Loader 1.1.18 software • USB cable (to-male) • Firmware files contained in 3GSDI To HDMI Converter Firmware 1.1.5 1. Download 3GSDI Converter Firmware Loader 1.0.18 from a. Create a new folder and decompress the downloaded file Mini_Updater_Release_1_0_18.zip into the newly created folder. b. Read and follow instructions on the Installation Guide.txt for installing the firware loader software. 2. Connect the USB cable between your PC and the EXT-3GSDI-2-HDMI1.3 a. Check Device Manager on Windows to find the correct COM port number for the USB connection. Remember this COM port number for use in step #4. 11 FIRMWARE UPDATE 3. Download and decompress 3GSDI to HDMI Converter Firmware 1.1.5 from to the new folder created in Step #1. 4. After installing the Firmware Loader described in Step #2, run the program via the Windows Start Menu….Start/Programs/Gefen/Mini Updater/ Mini Updater. 5. 6. a. Use the drop-down arrow to choose the COM port shown in Step #2. Browse for the file Mini3GSDI_TO_HDMI_1_1_5.ini in the new folder created in Step#1 Once the file is found, click Update Device. 12 FIRMWARE UPDATE 7. After pressing Update Device, you should see this window confirming the correct COM port, the detected device, and the fi rmware binary file. 8. Another window will pop-up showing the firmware loader program doing a communication check 13 FIRMWARE UPDATE 9. If all steps are PASS, the firmware upload process can continue. Click YES to continue the update. If there is a FAIL, repeat steps #2-7. 10. After clicking YES, this window will appear twice showing th upload progress. 11. Once the upload process is complete, another window will pop up showing the message “Update finished”.”. 14 SPECIFICATIONS Max. image output resolutions: ............................2K (2048x1080), 1920x1080/60 Input Connector: ...........................................(1) BNC female SDI/HD-SDI/3G-SDI Input Connector: ............................................(1) Locking 5V DC power connector Input Connector: ..................................(1) USB connector (for fi rmware upgrades) Output Connector: ...........(1) BNC female SDI/HD-SDI/3G-SDI (w/buffered input) Output Connector: ..............................................(1) HDMI 1.3 Type A 19-pin Male Output Connectors: ...................................(2) L+R analog audio jacks (RCA-type) Input Video Bandwidth: .................................up to 3.0 Gbps (Single Link 3G-SDI) Output Video Bandwidth: ....................................225 MHz (Single Link HDMI 1.3) SDI Compliant: .......................................................SMPTE 259M, up to 360 Mb/s HD-SDI Compliant ..............................................SMPTE 292M, up to 1.485 Gbps 3G-SDI Compliant..........................................SMPTE 424M/425M, up to 3.0 Gbps Power Supply: .......................................................5V DC locking type, 2.5W each Dimensions: ........................................................................8.2’’ W x 1.1’’H x 7.5’’D Rack Size: ........................................................................................1U (half-width) Operating Temp.: ............................................................................0-40 degrees C Shipping Weight ............................................................................................. 4 lbs HDMI 1.3 Compliant 16 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for ninety (90) days from the day of reshipment to the Buyer. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all of which are expressly disclaimed. 1. Proof of sale may be required in order to claim warranty. 2. Customers outside the US are responsible for shipping charge...