Stimmen - 0, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
80 PAYCLOCK & FACEIN USER’S GUIDE • Move the face back until there is 9 to 25 inches between their face and the terminal. • Turn the head fully to the right. • Turn the head fully to the left. • Raise the head up slightly. • Lower the head down slightly. • Move the face back from the terminal until there is 9 to 25 inches between the face and the terminal (if adjust positioning message is still displaying). • Resume small head circles to the right (if adjust positioning message is still displaying). • The progress bar at the bottom of screen will display the process of the imaging. • When the face is enrolled the terminal will display, “Permit Open Door?” press ESC. • When “Permit Attendance?” displays, press OK. Note: You must press OK; otherwise punches will not be recorded for polling. • The screen will display “Finished” and will return to the “Input User No” screen. Continue with the next employee or press ESC, ESC and ESC again to return to the normal time/date screen. Card Verification Method • When “Please Swipe Card” displays, present the card at the terminal. • When the card is enrolled the terminal will display, “Permit Open Door?” press ESC. • When “Permit Attendance?” displays, press OK. Note: You must press OK; otherwise punches will not be recorded for polling. • The screen will display “Finished” and will return to the “Input User No” screen. Continue with the next employee or 81 PAYCLOCK & FACEIN USER’S GUIDE press ESC, ESC and ESC again to return to the normal time/date screen. Card & Face Verification Method When enrolling employee faces, take the following into consideration: Eye Glasses - It is recommended for the employee to enroll with the eye glasses on for half the process, then remove the eye glasses and complete the registration. Hair Style - If the employee has a hair style that has their hair covering or blocking their eyes, move the hair away from the eyes during the registration process. • When “Please Swipe Card” displays, present the card at the terminal. • Position the employee so the face is in the middle of the two cameras with 9 to 25 inches between the face and the terminal. • The image collecting screen will display, start the face recognition enrollment. • Perform 2 small head circles to the right. • Perform 2 small head circles to the left. • Move the face closer to the terminal until the white dashed square appears. • Move the face back until there is 9 to 25 inches between their face and the terminal. • Turn the head fully to the right. • Turn the head fully to the left. • Raise the head up slightly. • Lower the head down slightly. • Move the face back from the terminal until there is 9 to 25 inches between the face and the terminal (if adjust positioning message is still displaying). 82 PAYCLOCK & FACEIN USER’S GUIDE • Resume small head circles to the right (if adjust positioning message is still displaying). • The progress bar at the bottom of screen will display the process of the imaging. • When the face is enrolled the terminal will display, “Permit Open Door?” press ESC. • When “Permit Attendance?” displays, press OK. Note: You must press OK; otherwise punches will not be recorded for polling. • The screen will display “Finished” and will return to the “Input User No” screen. Continue with the next employee or press ESC, ESC and ESC again to return to the normal time/date screen. 83 PAYCLOCK & FACEIN USER’S GUIDE Appendix C - Connecting the FaceIN Directly to the Computer’s NIC This document describes the steps to configure FaceIN terminal to communicate with the PayClock database server when connecting directly into the computers wired NIC. This would be used when the user doesn’t have a network setup and has a computer that has a wired NIC. Step #1 - At the Computer where PayClock is installed See the More Information section for Windows XP, Vista and Windows 7 directions for accessing the NIC properties. • Open the Properties of the NIC. • Open the Properties of the Internet Protocol item. • Define the IP (10.0.1.1) and Subnet Mask (255.0.0.0). Step #2 - Connect the Ethernet cable to the computer and FaceIN • The computer will go through the process of acquiring the IP connection. Step #3 - At the FaceIN terminal • Press the MENU key, the Functions Menu will open. • Press 4, the System Setting menu will open. • From the System Setting menu, press 2 - Set Network. • Enter the IP Address for the terminal (using the computer’s IP as reference, i.e. 10.0.1.2) and press OK. • Enter the Mask (same as what was entered at the pc, i.e. 255.0.0.0) Code and press OK. • Leave the Gateway at the default (blank) and press OK. • The FaceIN terminal will restart automatically. Note: You may have to enter leading zeros when entering the addresses. For example, the address 10.0.0.1 would be entered as 010.000.000.001 at the terminal. 84 PAYCLOCK & FACEIN USER’S GUIDE Step #4 - At the PayClock software • Open the PayClock software and click on the Terminal Manager tab. • Cli...